Advertisement
Quick Links
Quick Start Guide
First-Time Use Guide
Search and download "SpeedyBee"' on Google Play or App Store.
Power the drone and launch the SpeedyBee app and search the
quad via Bluetooth.
After powering on the drone, open the SpeedyBee app, and use
Bluetooth to search for nearby BEE25. Once connected, you can
set parameters such as "Preset Mode" and "Meteor LED" on the
homepage or watch the "Binding Guide".
App Download
BEE25 Installation
After-Sales Service
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SpeedyBee BEE25
Summary of Contents for SpeedyBee BEE25
- Page 1 Quick Start Guide First-Time Use Guide Search and download "SpeedyBee"' on Google Play or App Store. Power the drone and launch the SpeedyBee app and search the quad via Bluetooth. After powering on the drone, open the SpeedyBee app, and use Bluetooth to search for nearby BEE25.
- Page 2 Preset Mode BEE25 introduces a new preset mode selection. Power on the drone, connect to BEE25 via the SpeedyBee app, and select the preset mode from the top of the main interface. Preset Mode Description Beginner Mode: Suitable for beginners, with limited power and angle.
- Page 3 Expert Mode: Suitable for experienced players, defaulting to manual mode. AUX1 Min:1725 Max:2100 1000 1200 1400 1500 1600 1800 2000 2100 AUX3 ANGLE Min:1325 Max:1700 1000 1200 1400 1500 1600 1800 2000 2100 AUX2 BEEPER Min:1725 Max:2100 1000 1200 1400 1500 1600 1800...
- Page 4 2.In the app interface, select "Meteor LED Settings" in the bottom right corner of the "Toolbox" to start customizing. Additionally, the Meteor LED on the BEE25 can also be controlled using remote controller. (enable the LED LOW channel in the mode, which is already on by default as channel 4 in the factory firmware).
- Page 5 O3 Air Unit Binding Before binding, make sure the firmware of the Air Unit, goggles, and remote controller are updated. Goggles 2 Goggles V2 Goggles Integra The Air Unit needs to bind with the goggles first, and then with the remote controller. 1.
- Page 6 Binding Guide By connecting to BEE25 with the SpeedyBee app, you can easily watch the corresponding binding guide videos. Ensure your drone's flight frequency is set correctly to avoid interference or unnecessary flight issues. Operation Steps: 1. Use the SpeedyBee app to connect to BEE25.
- Page 7 It is recommended to check if the firmware of the module and the receiver are consistent before binding. If not, please use the SpeedyBee app for firmware updates. 1.Power the drone on and off three times to put the receiver into binding mode.
- Page 8 ELRS Binding 19:46 TOOLS Crossfire configure DSM Forward Progr amming v0.2 ELRS ExpressLRS FrSky GaSuite LED blinks twice: FrSky RB30_RB40 during binding 0/500 Packet Rate 500(-105dbm)Hz Telem Ratio 1:128 Switch Mode Hybrid Model Match Off >TX Power >TX Administrator >WIFI Connectivity >Backpack [BLE Joystick] [Bind]...
Need help?
Do you have a question about the BEE25 and is the answer not in the manual?
Questions and answers