Partnering the GPS Receiver with your Pocket PC requires:
•
The Navigation System must be successfully installed
•
The Receiver must be charged or plugged in
•
The Pocket PC must be turned on
•
The Receiver must be turned on
•
The Pocket PC and the Receiver must be within 15 to 30 feet of each
other
Sometimes you may need to manually partner the Receiver with the Pocket
PC. The process of partnering differs between different versions of the
Pocket PC operating system.
Partnering with Windows Mobile 2003
Operating System
You use the Bluetooth Manager that comes on your Pocket PC to manually
partner the Pocket PC with the Receiver.
To manually partner in Mobile Windows 2003:
Tap the Start menu and then tap Bluetooth Manager. The Bluetooth
1
Manager screen appears.
Tap New at the bottom of the screen. The Bluetooth Connection
2
wizard appears.
Scroll down and tap Explore a Bluetooth device.
3
Tap the icon labeled BT-GPS-xxxxxx, where xxxxxx represents the
4
identifier for a specific GPS receiver.
In the service selection box, tap BT-GPS COM Port and then tap
5
Next. A shortcut is created.
To establish the partnership, tap and hold the icon labeled BT-GPS-
6
xxxxxx: BT-GPS COM Port. A menu appears.
Tap Connect. Two small green arrows appear on the icon indicating
7
that the connection has been made.
Owner's Manual
27