Starting The Application On The Pocket Pc - Dell Axim X3i Owner's Manual

storage card, the Existing map message appears, giving you the
opportunity to overwrite the existing map data. To overwrite the existing
map data, click OK.
Click Generate Map. The Generating Map progress screen appears. If
7
the correct CD is not available or another CD is needed, you will be
prompted to insert the CD.
When the map data has been successfully loaded onto the Pocket PC,
8
a message appears. Click the OK button.
To exit the Map Loader application, from the File menu choose Exit.
9

Starting the Application on the Pocket PC

Once you have loaded the map to your Pocket PC you are ready to start the
application.
To start the Navigation System:
Turn on the GPS receiver and place it where it can receive signals. A
1
blinking green light on the GPS receiver indicates that you have a GPS
fix (strong GPS signal).
NOTE:
It may take up to 15 minutes to acquire a satellite fix.
Tap the Start menu and then tap Programs. The Programs screen
2
appears.
NOTE:
Once you have used the Navigation System on your Pocket PC the
Navigation System icon will appear in the recently used programs. You
can tap the icon to start the Navigation System.
Tap the Navigation System icon on the Programs screen. A safety
3
warning screen appears.
NOTE:
Important: You should not operate your Pocket PC while driving a
moving vehicle.
Owner's Manual
19