Hollyland Solidcom C1 Pro User Manual page 4

1. Product Introduction
Product Introduction
1.1 Key Features
•The full-duplex headsets enable simultaneous communication without
the need to press buttons, with a communication range of 500m (1,600ft)
between the headset and the hub.
•The hub can support up to 20 headsets, is compatible with older headset
models, supports 6 groups, and can be quickly configured via a mobile app
or webpage.
•Supports roaming. When two hubs are cascaded via IP, headsets that move
out of the coverage area of one hub automatically connect to the other
hub, ensuring extendable communication.
•Delivers high-quality audio free of background noise, with a frequency
response range of 100 Hz - 7 kHz, a signal-to-noise ratio greater than 55dB,
and a distortion rate of less than 1%.
•Features ENC dual-mic noise cancellation technology, providing higher
quality communication in noisy environments.
•Operates on the 1.9 GHz frequency band, and complies with regulations
across different countries and regions.
•Boasts various ports, such as a LAN port and a 4-wire port, supports
cascading between hubs, and is compatible with third-party audio devices.
•The hub supports multiple power supply methods, including V-Mount
batteries, G-Mount batteries, and 12V/2A DC power.
•The hub can connect to a computer via USB to achieve UAC functionality,
allowing integration with remote conferencing software.
•The hub supports multiple upgrade methods, including OTA and webpage,
and the headsets can be upgraded by connecting them to the hub via USB.
EN-3