Hollyland Solidcom C1 Pro User Manual page 34

Product Usage
3.7.7 NFC Settings
Select NFC to access the NFC interface, where you can turn on or off the NFC
functionality.
Note:
If NFC is set to OFF, the headset can only be paired with the hub via a wired
connection. The Solidcom C1 or C1 Pro headset does not support the NFC
functionality and can only be paired via a wired connection.
3.7.8 Master/Remote Switch
Select M/R Mode to access the Master/Remote Switch interface, where you
can set the hub as eitehr the master device or the remote device.
Note:
When only one hub is used, it defaults to the Master device. If the hub is set to
Remote, it will not function properly.
EN-33