Merrytek MSA020 Instructions Manual page 9

10. Remote control
Remote control / DIP setting switchover
1. Adjusting the DIPs when power off, the settings back to current DIPs settings.
2. When press any buttons on remote controller, the settings back to current remote control settings.
11. Initialization
The light will turn on 100% brightness in the initial energizing sensor, and turn off after 60s.During
initialization, no external motion sensing signal will be detected.
Add: No.17th Building, Dianda Guyuan Industrial Park, Mashantou, Matian, Guangming District, Shenzhen, China, 518106
Tel: +86 (0)755-2305 7253
All technical information is subject to the physical performance, Merrick reserves the right to final interpretation
LIFEBEING SENSOR
Shenzhen Merrytek Technology Co.,Ltd
Fax: +86 (0)755-2786 3012
page 9 of 10
MSA020
Website: www.merrytek.com
Version: A0