Merrytek MSA020 Instructions Manual page 8

Note：It's necessary to set the hold time 30s or >30s if you want to realize breathing detecting.
3) Daylight Sensor
*If daylight sensor is disable, the light will be on when movement is detected even if the lux level is enough or not.
4) Mode Selection
Note：pls be sure to set the sensor as master when using single or group mode；it only have one set as the master
and others as the slaves when master-slave mode.
5) Indicator light
Note: the indicator light is on when factory setting, you can turn off it via DIP or pressing the LS button of remote
6) Group Selection
0 1 2
Group Group Group Group
0 1 2
* It's broadcast mode or master-slave mode in Group 0, all connected DALI drivers are controlled synchronization.
* On group 1 to 15, the DALI master should to divide DALI drivers into the same array, up to 15 groups.
Add: No.17th Building, Dianda Guyuan Industrial Park, Mashantou, Matian, Guangming District, Shenzhen, China, 518106
Tel: +86 (0)755-2305 7253
All technical information is subject to the physical performance, Merrick reserves the right to final interpretation
LIFEBEING SENSOR
-
Ⅵ
-
Ⅶ
-
Ⅷ
Ⅰ
Ⅱ
(master-slave mode)
Ⅰ
Ⅱ
Ⅰ
Ⅱ
3 4 5
Group Group Group
3 4 5
Shenzhen Merrytek Technology Co.,Ltd
Fax: +86 (0)755-2786 3012
- ON
ON -
- -
6
ON 5Lux
- Disable
7
ON Master
- Slave
8
ON open
- close
controller.
6 7 8 9
Group Group Group Group
6 7 8 9
page 8 of 10
MSA020
10min
20min
30min
A B C
Group Group Group
10 11 12
Website: www.merrytek.com
Version: A0
D E F
Group Group Group
13 14 15