Page 2
Raindance Bodyspray Square 28469XX1 Technical Specification Flow rate 1.6 gpm Suggested tools: adjustable wrench Teflon tape Requires 1/2” NPT male nipple, recessed 3/8” behind the surface of the finished wall. Bodyspray Placement Custom showers are sized to the user(s). Bodysprays are normally placed at the upper back, middle back, and upper thigh.
Page 3
Rough-in Suggestion For each bodyspray, install a properly anchored drop-ear ell at least 2” behnd the surface of the finished wall. Install a test nipple in each ell. When the finished wall is complete, mark the test nipple at the wall surface. Remove the test nipple, and measure it to the mark.
Page 4
Install the base body. Push the spray face over the base body. Install the clip, narrow side facing forward. Install the cover.
Page 5
Scale Removal This bodyspray uses the Rubit cleaning system. The spray channels are lined with a material that resists scale buildup. If scale deposits are noticed in the spray channels, turn the water on lightly and rub across the channels with a finger or a sponge.
Page 6
Cleaning Recommendation for Hansgrohe Products Modern sanitary faucetry and shower fixtures consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain points when cleaning: Cleaning materials for faucets and shower products: Acids are necessary ingredients of cleaning materials for removing lime.
Page 7
limitation, a commercial purpose, this warranty extends only (i) for 1 year, with respect to Interaktiv and Retroaktiv products, and (ii) for years, with respect to AXOR, ShowerPower and Pharo products. THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: Conditions, malfunctions or damage not resulting from defects in material or workmanship.
Need help?
Do you have a question about the Raindance Bodyspray Square 28469001 and is the answer not in the manual?
Questions and answers