Basler Aviator Camera Link Installation And Setup Manual page 33

6 Next Steps
We assume that you have succeeded in acquiring images and setting the camera's basic
parameters using the pylon Viewer and that you were able to optimize the image quality.
To meet the requirements of your application, you will likely need to change additional camera
settings and to modify earlier camera settings.
Refer to the Features chapter in your camera user's manual for details about additional camera
settings.
Contact Basler technical support if you need more assistance. The contact numbers appear in the
title pages of this manual.
If you have not already done so, implement the typical conditions of operation as required by your
application before proceeding with the next steps. In particular, choose the lens and the illumination
required by your application.
Before making the additional camera settings, you must know the requirements for your application
regarding depth of focus, image acquisition rate, size of the AOI, and contrast. And you must know
what the priority of the requirements are since some of the settings depend on each other or have
opposite effects.
Your next steps will involve some or all of the following:
Selecting the pixel data format.
Selecting a triggering scheme and an exposure control mode.
Fine tuning the exposure time.
Defining an AOI.
Enabling and parameterizing other features available on your specific camera model.
Configuring the camera from within your application program using the pylon API or via direct
register access.
Basler aviator Camera Link
Next Steps
27