Basler Aviator Camera Link Installation And Setup Manual page 16

Software Installation
8. A Custom Setup window will open.
a. Deselect the features you do not want to install:
To deselect an item, click the
drop down menu that appears.
In the example shown below, we have deselected the Pylon GigE Vision Drivers and the
Pylon IEEE 1394 Drivers. If you will only be using Camera Link cameras with your PC, we
strongly suggest that you do not install these two features.
We have also deselected the Speed-O-Meter, the DirectShow Driver, and the Twain Driver.
These features are not useful for Camera Link cameras.
We have selected the SDK for C++ and deslected the SDKs for all of the other available
programming languages. You should select the SDK for the programming language(s) you
use, and deselect those you do not use.
(Features that you do not install now can easily be added at a later time by rerunning the
installer.)
b. Click the Next button.
9. A Ready to Install the Program window will open.
Click the Install button.
10. When the installation process is complete, a Completed window will open.
Click the Finish button.
10
button beside the item and select the red X from the
Basler aviator Camera Link