Basler Aviator Camera Link Installation And Setup Manual page 15

3 Software Installation
3.1 Installing Basler pylon
If you have not already done so, obtain a copy of the appropriate Basler pylon software package
(see Section 1.1 on page
Once you have downloaded the software package, you can install the software by doing the
following:
1. Close all open Windows based applications on your computer. We most strongly recom-
mend that you close all open applications now.
2. Click Start, click Run, and click the Browse button.
3. Navigate to the location where you downloaded the pylon software installation package, select
the installation package, click the Open button, and click the OK button.
4. The program will prepare to install and then a Welcome window will open.
Click the Next button.
5. A License Agreement window will open.
Accept the agreement and click the Next button.
6. A Customer Information window will open.
Enter the appropriate information and click the Next button.
7. A Destination Folder window will open.
In the Destination window:
a. If you want the software to be installed in the default location, click the Next button.
b. If you want the software to be installed in a different location, click the Change button,
navigate to the location where you want the software installed, and click the OK button.
Basler aviator Camera Link
1.)
Software Installation
9