INK+IVY BLAZE TRIANGLE WOOD END TABLE Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS
BLAZE TRIANGLE WOOD END TABLE
Please read below before assembly
Assemble the product on a flat, soft surface such as a carpet or cloth to prevent scratching
the finish.
Do not discard any content until assembly is complete to avoid accidentally discarding small
parts or hardware.
Take out all parts and hardware from box.
Failure to follow these instructions may cause the bolts to misalign during assembly.
DISCLAIMERS:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE
FOR ANY DAMAGES RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE INSPECTED AT LEAST
EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURY, AND
ENSURE STABILITY.
PEOPLE NEEDED
TOOLS REQUIRED (NOT INCLUDED)
75
lbs for Table
WEIGHT LIMIT
RUBBER MALLET
SCAN QR CODE FOR
ASSEMBLY VIDEO
10
Minutes
ESTIMATED TIME
Page 1 of 7