INK+IVY MILA Assembly Instructions

Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
Parts List
Description
Item
Table Top
P1
P2
Metal Legs
Assembly Procedures:
Step 1: Assemble the table on a flat, soft surface such as a carpet or cloth to prevent
scratching the finish. Assemble Metal Leg (P2) to Metal Leg (P2) as shown below. Do the
same way for two rest Metal Legs.
Step 2: Assemble Metal Leg Frames assembled in Step 1 together as shown below.
Bolts 1/4"x 5/8''L
(H1)x8
(H2)x8 Lock Washers 1/4"
Flat Washers 1/4"
(H3)x8
(H4)x1 Allen Wrench
Hardware List
QTY
Item
H1
Bolts 1/4"x 5/8"L
1
H2
Lock Washers 1/4"
H3
Flat Washers 1/4"
4
H4 Allen Wrench
H5
Adjustable Levelers 1/4"
Description
Attention: Assemble one end first,
then continue with the rest end.
Attention: Assemble one end first,
then continue with the rest end.
QTY
16
16
16
1
4