INK+IVY Rocket Coffee Table Assembly Instructions

Important safety instructions:

Please read carefully all instructions before assembly.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.

Take out all parts and hardware from box.

DISCLAIMER:

WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES

RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.

Step 1. Assemble the table on a flat, soft surface such as a carpet or cloth to prevent scratching the finish

shelf side panel (P6) to the shelf (P5). Securely tighten all bolts by Allen wrench (H5), but do not over tighten the

bolts.

Attach

Table of Contents

Do you have a question about the Rocket Coffee Table and is the answer not in the manual?

Page 1 Important safety instructions: Please read carefully all instructions before assembly. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware. Take out all parts and hardware from box.
Page 2 Ø 1/4*3-1/2" Long Bolts Half Round Washer s 1/4" Nuts 1/4" Open Spanner 1/4" Dowels (H1)x6 (H3)x6 (H4)x6 (H5)x1...
Page 3 (H1)x6 Ø1/4*3-1/2" Long Bolts (H4)x6 (H5)x1 Half Round Washer s 1/4" Nuts 1/4" Open Spanner 1/4" Dowels (H9)x4 ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL HARDWARE IS KEPT TIGHTENED.