Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Height-adjustable Dual Monitor Pole Mount
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
KPY220
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CHIEF KPY220
Summary of Contents for CHIEF KPY220
- Page 1 I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation Height-adjustable Dual Monitor Pole Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description KPY220...
- Page 2 KPY220 mount up to (and including) the displays does not exceed 40 lbs (18.14 kg).
- Page 3 Installation Instructions KPY220 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación...
- Page 4 Installation Instructions KPY220 TOOLS REQUIRED FOR INSTALLATION 1/4" PARTS C (1) B (1) [pole clamp back] A (2) [Y-adapter pole clamp] [Height-adjustable arm] G (2) F (2) [plastic spacer] E (2) [lock washer] D (2) [pivot pin] [cable management cover]...
- Page 5 Installation Instructions KPY220 INSTALLATION DUAL ARM ASSEMBLY BASIC ASSEMBLY INSTALLATION TO POLE Insert pin (E) into Y-adapter (B) upper bore. (See Figure 3) Determine approximate location for mount keeping in mind display size, extension, height adjustment, and pitch/roll requirements. Place Y-adapter pole clamp (B) against pole, with pole clamp back (C) on opposite side of pole.
- Page 6 KPY220 Installation Instructions Lift outer arm from pin (with screw and washers) and place on protective surface. Remove spacer (F) from pin (See Figure 5). DO NOT POSITION Install lock washer (G) on pin (See Figure 5). EITHER ARM ASSEMBLY...
- Page 7 Installation Instructions KPY220 Place the four spacers (Q or R) over each mounting hole on the back of display. (See Figure 8) (P) x 2 Orient mount so that mounting holes in the Centris cup are aligned with the holes in the spacers (Q or R); rotate the Centris cup as required (See Figure 8).
- Page 8 KPY220 Installation Instructions CABLE MANAGEMENT installation of cover (D) or screws (K). Carefully insert cables in cavity located in lower portion of Attach all cables to display. static mount arm (See Figure 11). Open the cable management bracket by sliding it towards Using Phillips screwdriver, install cover (D) with two #8-32 x the edge of the arm (See Figure 9).
- Page 9 Installation Instructions KPY220 HEIGHT ADJUSTABLE (IF APPLICABLE) IMPORTANT ! : It is important that the mount be attached to the mounting surface AND display be attached to the mount BEFORE attempting to adjust the height adjustable arm. Using 5/32" hex key, slightly loosen or tighten the adjustment screw as necessary (See Figure 13).
- Page 10 KPY220 Installation Instructions...
- Page 11 Installation Instructions KPY220...
- Page 12 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615 Chief Manufacturing, a products division Asia Pacific A Office No. 1 on 12/F, Shatin Galleria of Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the KPY220 and is the answer not in the manual?
Questions and answers