Schmeiser GREAT PLAINS STEALTH PRO CDH000-3 Operation And Parts Manual

Hide thumbs

page of 44

/ 44
Bookmarks

Quick Links

Download this manual

CDH000-3, CDH000-4, CDH000-5,

MODELS

CDH000-3MT, CDH000-4MT, CDH000-5MT

by T. G. SCHMEISER Co., Inc.

OPERATION AND PARTS

Read and understand the manual. This manual provides information and procedures

MANUAL

to safely operate and maintain the Stealth Pro™ Drill .

Version 1.0

October 2024

151-868M

Need help?

Do you have a question about the GREAT PLAINS STEALTH PRO CDH000-3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Schmeiser GREAT PLAINS STEALTH PRO CDH000-3

Page 1 CDH000-3, CDH000-4, CDH000-5, MODELS CDH000-3MT, CDH000-4MT, CDH000-5MT by T. G. SCHMEISER Co., Inc. OPERATION AND PARTS MANUAL Version 1.0 October 2024 151-868M Read and understand the manual. This manual provides information and procedures to safely operate and maintain the Stealth Pro™ Drill .
Page 2 Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! © Copyright 2024 All rights reserved...
Page 3 Stealth Pro™ Compact Drill 3', 4', and 5' CONTENTS Disc Opener Spring Pressure Adjustment..16 INTRODUCTION.............4 Drive Wheel Adjustment......16 Engineered for Long Life........4 Disc Blade Spacing Adjustment......17 Serial Number Information........4 Opener /disc Spacing.........17 Replacement Parts............4 Adjusting Disc Contact........17 Warranty Information..........4 Disc Scraper Adjustment......18 Serial Number Location..........4 Chain Maintenance..........18 Factory Contact Information........4...
Page 4 Stealth Pro™ Compact Drill 3', 4', and 5' Introduction Serial Number Location This manual has been prepared to instruct you in the safe and efficient operation of this machine. Read and study it thoroughly. It will familiarize you with safety, operation, adjustments, and maintenance of your new equipment.
Page 5 Stealth Pro™ Compact Drill 3', 4', and 5' SPECIFICATIONS DRILL MODEL CDH000-3 CDH000-4 CDH000-5 CDH000-3MT CDH000-4MT CDH000-5MT Row Count Row Spacing 7.5 in (19.1 cm) 7.5 in (19.1 cm) 7.5 in (19.1 cm) 7.5 in (19.1 cm) 7.5 in (19.1 cm) 7.5 in (19.1 cm) Swath (planting width) 37.5”...
Page 6 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY SAFETY SAFETY ALERT SYMBOLS This is the safety alert symbol. It is used to Carefully read and follow all safety precautions before alert you to potential personal injury hazards. Obey all safety messages that follow this operation.
Page 7 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY SAFETY ICONS Hazard Avoidance SLOW VEHICLE PLACARD NOMENCLATURE This manual and the equipment has BLOCK WHEELS numerous safety icons. SET PARKING BRAKE These safety icons provide important CRUSHING HAZARD (body) operating instructions which alert you STOP ENGINE STOP to potential personal injury hazards.
Page 8 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY Visually Inspect GENERAL SAFETY Visually inspect the unit for any loose bolts, worn parts, or cracked welds, and make necessary repairs before using the unit . Read and Understand Manual Personal Protection Equipment To prevent personal injury or even death, be sure When working around or operating this unit, wear you read and understand all of the instructions in...
Page 9 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY When towing the unit on public roads, use SAFETY INSTRUCTIONS flashing amber warning lights (if applicable) and a slow moving vehicle (SMV) identification emblem. Make sure the SMV placard is clearly visible to vehicles Some localities prohibit the use of flashing amber Visually check all fasteners for tightness lights .
Page 10 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY SAFETY INSTRUCTIONS Rollover Hazard Do not leave tools lying on the unit . To avoid serious injury or death from falling off tractor, equipment runover, Never replace hex bolts with less than Grade rollover, or crushing: 5 bolts unless otherwise specified.
Page 11 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY Bolt Torque Requirements It is extremely important to apply and maintain proper torque on all bolts. Use a torque wrench to assure the Personal Injury Hazard proper amount of torque is being applied to the fastener. Repairs or modifications to the implement can Start all bolts or nuts by hand to prevent cross threading.
Page 12 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY SIGNS AND DECALS SAFETY SIGNS PLACEMENT SAFETY INSTRUCTIONS Follow all operating, maintenance, and safety Instructions found in this manual . Replace all worn or damaged safety and instruction decals . ● It is the responsibility of the customer to know the marking requirements of the local highway authorities and to comply with the regulations.
Page 13 Stealth Pro™ Compact Drill 3', 4', and 5' SAFETY SIGNS AND DECALS SAFETY SIGNS AND DECALS Item Part Number Description Qty. D48X038RTM Read the Manual D48X038CRR Crush / Rollover Hazard D28X048PPT Pinch Point D28X048SCE Sharp Object Hazard D28X048MPH Moving Parts Hazard D28X048ESH Excessive Speed Hazard D28X048TWB...
Page 14 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION ASSEMBLY AND OPERATION a. Go to the normal servicing and maintenance schedule, as defined in the Maintenance Section. Understand Safety Procedures! Connecting to Tractor Read and understand all safety procedures Make sure the unit is resting on the ground with parking described in this manual before performing any work stand securely installed before attaching the unit to the...
Page 15 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION DRILL ADJUSTMENTS AND CALIBRATIONS Seed Rate Handle Adjustment The seed rate handle controls the percent engagement of the seed sprocket in each seed cup. The Planting Depth Adjustment initial setting of the handle is given by the seed rate chart on the decal.
Page 16 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION Disc Opener Spring Pressure Adjustment Each opener spring can be adjusted for down pressure. This is useful when penetrating hard soil and for planting in tractor tire tracks. The springs allow the openers to follow uneven profile terrain.
Page 17 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION Disc Blade Spacing Adjustment Adjusting Disc Contact 1. Remove the bolt 1 retaining the opener disc on one side. Carefully remove the disc, noting Opener Disc Spacing how many spacers 2 are outside the disc and inside the disc.
Page 18 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION Disc Scraper Adjustment To keep opener discs turning freely, dirt scrapers are mounted between discs to clean as the discs rotate. As field conditions very, scrapers may need to be lowered.
Page 19 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION Coulter Adjustment Coulter Down Force A no-till coulter is mounted directly ahead of each Springs on coulters act as shock absorbers opener on the drill. The coulters cut through heavy trash preventing coulter parts from breaking.
Page 20 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION ● Rotate crank until seed starts falling from Drill Seed Rate Calibration sample rows. NOTE: Seeding rates will vary greatly with variations in ● Weigh and record total weight on light-weight sizes of seeds.
Page 21 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION REMEMBER: Tire size and field conditions will also affect seeding rates. Be certain that your Stealth Pro Drill tires are 20.5 x 8.0 x 10 and that they have the proper inflation. When drilling, check the amount of seed you are using by noting area drilled, amount of seed added to drill, and level of seed in drill box.
Page 22 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION No-Coulters Drill Sprocket and Chain Assemblies (CDH000-3MT, CDH000-4MT, CDH000-5MT) DRIVE CHAIN GSK-12BS33 33T SPROCKET GSK-08ID15 15T IDLER SPROCKETS VDS-CH4065 #40 CHAIN (64-1/4" LONG) GSK-12BS13 13T SPROCKET END CHAIN 202-002H 19T SPROCKET VDS-00K007 33T SPROCKET...
Page 23 Stealth Pro™ Compact Drill 3', 4', and 5' ASSEMBLY AND OPERATION With-Coulters Drill Sprocket and Chain Assemblies (CDH000-3, CDH000-4, CDH000-5) DRIVE CHAIN GSK-12BS33 33T SPROCKET GSK-08ID15 15T IDLER SPROCKETS VDS-CH4124 #40 CHAIN (123-3/4" LONG) GSK-12BS13 13T SPROCKET END CHAIN VDS-CH4055 #40 CHAIN 202-002H (58"...
Page 24 Stealth Pro™ Compact Drill 3', 4', and 5' MAINTENANCE AND LUBRICATION Coulter Hubs MAINTENANCE AND LUBRICATION Check for grease zerks and lubricate once a season with bearing grease until resistance is felt. Replace hubs if damaged Understand Safety Procedures! Read and understand all safety procedures described in this manual before performing any work on or around the implement.
Page 25 Stealth Pro™ Compact Drill 3', 4', and 5' STORAGE Placing in storage NOTE: Proper servicing and maintenance is the key to long implement life. With careful and 1. Move the Stealth Pro Drill to a storage area with a systematic inspection, you can avoid costly firm and level base to prevent it from tipping or sinking into the ground.
Page 26 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Ordering Parts We manufacture a quality product that requires very little maintenance or repair. However, should a part break or become damaged, our knowledgeable staff can make sure you receive the part(s) to put your unit back into operation. Parts Drawings Stealth Pro Drill Box Assembly Ref.
Page 27 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Stealth Pro Drill Box Assembly 18 19 29 30 www.gpstealthpro.com...
Page 28 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Feeder Cup and Drive Components Assembly Ref. No. New Part No. Description VDS-36B000 3’ Box Weldment VDS-48B000 4’ Box Weldment VDS-60B000 5’ Box Weldment VDS-36K001 3’ Cup Tray VDS-48K001 4’ Cup Tray VDS-60K001 5’...
Page 29 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Feeder Cup and Drive Components Assembly 11 12 26 28 NOTE: ENSURE THAT SQUARE SEED CUP SHAFT IS WELL LUBRICATED WHERE SHAFT GOES THROUGH CUP DRIVE BEARING. www.gpstealthpro.com...
Page 30 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Feeder Cup Assembly Ref. No. Part No. Description VDS-36K001 3’ Seed Cup Tray VDS-48K001 4’ Seed Cup Tray VDS-60K001 5’ Seed Cup Tray 802-002C Bolt, Carriage 1/4” - 20 x 3/4” Long 890-350C Feeder Cup Shaft Locking Collar 801-035C...
Page 31 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Feeder Cup Assembly NOTE: ENSURE THAT SQUARE SEED CUP SHAFT (item 19) IS WELL LUBRICATED WHERE SHAFT GOES THROUGH CUP DRIVE BEARING (item 17). www.gpstealthpro.com...
Page 32 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Main Frame, Wheel Frame, and Walkboard Assemblies Ref No. Part No. Description VDS-36A000 3' Main Frame VDS-48A000 4’ Main Frame VDS-60A000 5’ Main Frame VDS-36H000 3’ Walk Board VDS-48H000 4’ Walk Board VDS-60H000 5’...
Page 33 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Main Frame, Wheel Frame, and Walkboard Assemblies www.gpstealthpro.com...
Page 34 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Jack Shaft, Sprocket, Idler, and Bearing Assemblies Ref No. New Part No. Description VDS-36G006 3' Jack Shaft VDS-48G006 4’ Jack Shaft VDS-60G006 5’ Jack Shaft VDS-00G002 End Plate Tensioner Arm VDS-00G001N Center Tensioner Arm and Spring Anchor VDS-00G102 Bushing, 13/16”...
Page 35 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Jack Shaft, Sprocket, Idler, and Bearing Assemblies www.gpstealthpro.com...
Page 36 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Straight Arm Double Opener Assembly Ref No. New Part No. Description 806-004C U-Bolt, 3/8”-16 X 2” X 2-¾” 804-013C 3/8” Lock Washer 803-014C 3/8”-16 NC Hex Nut 121-025D Spring Rod Casting Clip 812-012C Casting Double Spring Rod 121-011A...
Page 37 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Straight Arm Double Opener Assembly www.gpstealthpro.com...
Page 38 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS 2” x 13” Smooth Crown Press Wheel Assembly Ref. No. Old Part No. Description 802-058C 5/8” X 2-1/2” Gr.5 NC Cap Screw 804-022C 5/8” Lock Washer 803-088C 1/4” NC Nylon Lock Hex Nut 817-296C 2”...
Page 39 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS 2” x 13” Smooth Crown Press Wheel Assembly www.gpstealthpro.com...
Page 40 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Drill Coulter Assembly Ref No. Part No. Description 803-048C Nut, Hex Jam 3/4”-10 Plt. 149-558D Coulter Spring Washer 149-559D Spring, 2-1/4” OD X 0.5” Coil 805-331C Coulter Spring Guide Tube 249-225S Pivot Coulter Casting Mount Assembly RH (includes item 16) 800-001C Grease Zerk Straight, 1/4”-28...
Page 41 Stealth Pro™ Compact Drill 3', 4', and 5' PARTS Drill Coulter Assembly www.gpstealthpro.com...
Page 42 Stealth Pro™ Compact Drill 3', 4', and 5' NOTES www.gpstealthpro.com...
Page 43 Stealth Pro™ Compact Drill 3', 4', and 5' www.gpstealthpro.com...
Page 44 Great Plains, Mfg. 1525 E. North St. P. O. Box 5060 Salina, KS 67402 Version 1.0 October 2024...

This manual is also suitable for:

Great plains stealth pro cdh000-4 Great plains stealth pro cdh000-5 Great plains stealth pro cdh000-3mt Great plains stealth pro cdh000-4mt Great plains stealth pro cdh000-5mt