WERTHEIM W6030 Instruction Manual page 8

ASSEMBLING YOUR CLEANER The cleaner should be switched
off and disconnected from the mains supply before you start to
assemble.
1. Connect the hose body connector to
the cleaner making sure it fits firmly.
3. Extend or reduce the length of the
wand by depressing button and
moving the slider.
5. To use the blower function, remove
rear filter cover and filter and fit
blower assembly.
2193412-05.indd 8
2. Fit handle into the wand until it
clicks into place.
4. Push the wand into the power brush
until it clicks into place. To remove,
press button and separate.
6. Insert the hose into the blower outlet
until the catches click to engage.
8
1/2/08 11:10:04 AM