WERTHEIM W6030 Instruction Manual page 10

FILTER MAINTENANCE: The HEPA filter should be washed or
replaced whenever the filter indicator comes on with a red light or
every fifth dust bag. Do not use cleaner without filters fitted.
1. To remove Motor Filter, open
cleaner cover and lift bag holder.
3. Before replacing Motor Filter,
remove any dust and refit new filter
securely in place.
5. Remove HEPA Filter, shake off any
dust and wash the dirty side under
warm tap water. Dry thoroughly.
2193412-05.indd 10
2. Remove Motor Filter by holding
tab and pull out from holder.
4. To gain access to HEPA Filter and
Micro Filters, press rear cover
release latch and remove cover.
6. Replace the 2 Micro Filters and
refit under filter cover, refit HEPA
Filter and close back securely.
10
Motor Filter
1/2/08 11:10:06 AM