Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Dahua Technology Lite Series
Summary of Contents for Dahua Technology Lite Series
- Page 1 Eyeball Network Camera Quick Start Guide ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD. V1.0.3...
- Page 2 Quick Start Guide Foreword General This manual introduces the functions and operations of the camera. Safety Instructions The following categorized signal words with defined meaning might appear in the manual. Signal Words Meaning Indicates a medium or low potential hazard which, if not avoided, could result in slight or moderate injury.
- Page 3 Quick Start Guide Important Safeguards and Warnings Electrical Safety All installation and operation shall conform to your local electrical safety codes. The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no higher than PS2.
- Page 4 Quick Start Guide Strengthen the protection of network, device data and personal information by adopting measures which include but not limited to using strong password, changing password regularly, upgrading firmware to the latest version, and isolating computer network. For some devices with old firmware versions, the ONVIF password will not be changed automatically along with changing the system password, and you need to upgrade the firmware or manually change the ONVIF password.
- Page 5 Quick Start Guide Table of Contents Foreword ................................I Important Safeguards and Warnings ......................II 1 Introduction ..............................1 2 Network Configuration ..........................2 Initializing Device ..................................2 Changing Device IP Address ..............................4 Logging in to Web Page ................................4 3 Installation ..............................
- Page 6 Quick Start Guide Introduction Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and water damage. For the detailed operation, see FAQ manual. Figure 1-1 Cables Table 1-1 Cable information Port name Description Connects to network with network cable. ...
- Page 7 Quick Start Guide Network Configuration Device initialization and IP setting can be finished with the ConfigTool or on web page. For more information, see web operation manual. Device initialization is available on select models, and it is required at first use or after the device ...
- Page 8 Quick Start Guide When initializing multiple devices, ConfigTool initializes all devices based on the password reset mode of the first selected device. Figure 2-2 Password setting Step 8 Set and confirm the password of the devices, then enter a valid email address, and then click Next.
- Page 9 Quick Start Guide Changing Device IP Address You can change IP address of one or multiple devices in one time. This section is based on changing IP addresses in batches. Changing IP addresses in batches is available only when the corresponding devices have the ...
- Page 10 Quick Start Guide Installation Packing List The tool required for the installation such as electric drill is not provided in the package. The operation manual and related tool information are contained in the disk or the QR code. Figure 3-1 Packing list Dimensions...
- Page 11 Quick Start Guide Installing Camera 3.3.1 Installation Method Figure 3-3 Installation method 3.3.2 Attaching Camera Make sure that the mounting surface is strong enough to hold at least three times the weight of the device and bracket.
- Page 12 Quick Start Guide Figure 3-4 Cable going through the side cable tray...
- Page 13 Quick Start Guide Figure 3-5 Cable going through the mounting surface 3.3.3 (Optional) Installing Waterproof Connector This part is needed only when there is waterproof connector in the package and the device is used outdoors.
- Page 14 Quick Start Guide Figure 3-6 Install waterproof connector...
- Page 15 Quick Start Guide 3.3.4 Adjusting Lens Angle Figure 3-7 Adjust lens angle...
- Page 16 Quick Start Guide...
Need help?
Do you have a question about the Lite Series and is the answer not in the manual?
Questions and answers