Table of Contents
Advertisement
OPERATION
uSing the c 717'S internal dvd plaYer
You may operate the C 717 DVD Receiver from its front panel or via the SR 9
remote control. Since the remote will be the primary controller for most
cases, we will focus on remote-controlled operations. Be sure also to read
the section, "IDENTIFICATION OF CONTROLS - FRONT PANEL".
REGION MANAGEMENT INFORMATION
The C 717's internal DVD Player is designed and manufactured to respond
to the Region Management Information that is recorded on a DVD disc. If
the Region number described on the DVD disc does not correspond to the
Region number shown on the back of the C 717, the C 717 cannot play that
disc. The OSD will display "Region Error" ("REGION Err" in the display window)
when an incompatible region disc is loaded.
PLAYABLE DISCS
The C 717 has exceptional playability. It has support for DVD video, DVD±R,
DVD±RW, VCD/SVCD with playback control (PBC), Audio CD and CD-R/CD-
RW that contains audio titles, DivX, MP3, WMA and JPEG files.
NOTE
You cannot playback discs other than those listed above. To do so may
render the C 717 permanently inoperable.
DISC LOADING AND PLAYBACK
There are two different disc sizes. Place the disc in the correct guide on the
disc tray. If the disc is out of the guide, it may damage the disc and cause
the C 717 to malfunction. "NO DISC" appears on both the C 717's display
and the TV/monitor screen, if the disc is placed upside down (and it is a
single sided disc).
The following are important tips when loading a disc
•
Do not push the disc tray while it is moving. Doing so may cause the
C 717 to malfunction.
•
Do not push up the disc tray or put any objects other than discs on the
disc tray. Doing so may cause the C 717 to malfunction.
•
Keep your fingers well clear of the disc tray as it is closing. Be especially
careful with children's fingers around the closing disc tray, as there is a
risk of personal injury.
Press [
], the disc tray is automatically closed. Playback of the first track
starts if a CD is loaded. For DVD or other disc media, playback operation is
accessible through their menu screen.
NOTES
• During SVCD/VCD playback, press the [MENU] button to turn ON or OFF
the Playback Control (PBC).
• Do not move the C 717 during playback. Doing so may damage the disc
and the C 717.
about the
SYmbol diSplaY
" " may appear on your TV display during operation. This indicates that
the function you entered or try to execute is not available on that specific
disc or file.
1
SETUP MENU
The Setup Menu allows one to customize the operation of the C 717. If the
factory defaults do not suit your taste, you will need to use the setup menu
to configure the C 717 yourself.
To access and navigate through the Setup Menu selections, please refer to
and follow the directions stated in the above section about "NAVIGATING
THE SETUP MENU OSD AND MAKING CHANGES. " The Setup Menu is only
available at DVD mode.
TV ASPECT RATIO
Set TV ASPECT RATIO to select a picture size matching the aspect ratio of
your TV/Monitor.
Select "4:3 LB" or "4:3 PS" when a standard 4:3 TV is connected.
4:3 lb: Displays a wide picture with bands on the upper and lower
portions of the screen.
4:3 pS: Automatically displays the wide picture on the entire screen
and cuts off the portions that do not fit.
16:9: Select when a 16:9 wide TV is connected.
TV SYSTEM
The "AUTO" setting will automatically detect the media being played and
display it. The other two settings, "NTSC" and "PAL", can be selected to force
the output of the C 717 to the desired format. For example one can load a
PAL media and display it in the NTSC format. Similarly one can load an NTSC
media and display it in the PAL format.
Depending on the type of TV set you own, select the signal mode you wish
to watch your disc.
Advertisement
Table of Contents
