NAD C717 Owner's Manual page 8

IDENTIFICATION OF CONTROLS
front panel
10 tone/balance: Toggle this button to adjust BASS, TREBLE and
BALANCE CENTER settings in combination with [SCROLL/PUSH/ENTER]
knob. Refer also to the item about ADJUSTING TONE AND BALANCE
CONTROLS under the SETTING UP THE C 717 section of the SETUP page.
11 tuner mode: In AM or FM mode and in combination with the
[SCROLL/PUSH/ENTER] knob, toggle this button to select "Preset Tune"
or "Manual Tune". Refer also to the item about TUNER MODE at the
LISTENING TO AM/FM RADIO section of the OPERATION page.
12 volume: Turn clockwise to increase the volume setting; counter
clockwise to lower it. The VFD shows the VOLUME setting displayed as
increments between 01 through to 59. "VOLUME MIN" will be displayed
when volume setting is at its lowest level and "VOLUME MAX" when
volume is at its highest level.

13 Scroll/puSh/enter [
combination with [TUNER MODE] knob, use this knob to step up or
down stored presets or to manually tune AM/FM frequencies.
During disc playback, rotate this knob to skip UP/DOWN tracks, chapter
or files.
Use this knob in combination with [TIMER] button to setup Time, Timer
or SLEEP settings.
14 remote SenSor: Point the SR 9 at the remote sensor and press the
buttons. Do not expose the remote sensor of the C 717 to a strong light
source such as direct sunlight or illumination. If you do so, you may not
be able to operate the C 717 with the remote control.
distance: About 23 ft (7 m) from the front of the remote sensor
angle: About 30° in each direction of the front of the remote sensor
15 vacuum fluoreScent diSplaY (vfd): Provides visual
information about the unit's important modes, settings, functions,
status of the current source like disc playback time and other indicators.
]: In AM or FM mode and in