Table of Contents
Advertisement
IDENTIFICATION OF CONTROLS
rear panel
9 tv: Input for additional line level input signals such as TV, Mini Disc
player or the output signal from a step-up amplifier for a turntable. Use
a twin RCA-to-RCA lead to connect the auxiliary unit's left and right
"Audio Outputs" to this input.
NOTE
TV input port is for audio signal only.
10 fm, am antenna input: Connect the supplied lead-type FM
antenna to the FM antenna input. Extend the lead. Experiment freely
with your antenna placement and orientation until you get the clearest
sound and lowest background noise. Fix the antenna in the desired
position by using thumb tacks, push pins or any suitable means.
The AM loop antenna supplied with the C 717 (or a suitable
replacement) is required for AM reception. Open the clip terminal
lever; insert the wire making sure to match the color-coded (white
and black) ends of the wire to that of the terminal and close the
lever ensuring that the lever locks the wire in place. Testing different
positions for the antenna may improve reception; vertical orientation
will usually produce the best results. Antenna proximity to large metal
objects (appliances, radiators) may impair reception, as will attempts to
lengthen the wire to the loop.
NOTE
An external AM antenna can improve long distance reception
substantially; consult your NAD audio specialist or a professional
antenna installer. Do not connect anything other than a loop antenna
to the AM ANTENNA terminal.
10
Advertisement
Table of Contents
