Download Print this page

Baxi Megaflo System HE IE Series Installation & Servicing Instructions Manual page 2

Gas fired wall mounted condensing boiler

Advertisement

Surefire Software -
http://www.surefiresoftware.co.uk/index.php
The Company Secretary,
Baxi Heating UK Ltd,
Brooks House,
Coventry Road,
Warwick.
CV34 4LL
Full acknowledgement of author and source must be given.
WARNING: Any person who does any unauthorised act in relation to a copyright work may be liable to criminal prosecution and civil claims for
damages.
page 2
IMPORTANT - Installation, Commissioning, Service & Repair
This appliance must be installed in accordance with the manufacturer's instructions and the regulations in force. Read the instructions fully before
installing or using the appliance.
The installation must be carried out by a competent person as stated in I.S. 813 "Domestic Gas Installations".
The addition of anything that may interfere with the normal operation of the appliance without express written permission from the manufacturer or
his agent could invalidate the appliance warranty.
Warning - Check the information on the data plate is compatible with local supply conditions.
The boiler meets the requirements of Statutory Instrument " The Boiler (Efficiency) Regulations 1993 No 3083" and is deemed to meet the
requirements of Directive 92/42/EEC on the energy efficiency requirements for new hot water boilers fired with liquid or gaseous fuels:-
Type test for purpose of Regulation 5 certified by:
Notified Body 0085.
Product/Production certified by:
Notified Bodies 0085 & 0086.
For IE only.
Legislation
This company declare that no substances harmful to health are contained in the appliance or used during appliance manufacture.
The appliance is suitable only for installation in IE and should be installed in accordance with the rules in force, and only used in a
suitably ventilated location.
Where no specific instructions are given, reference should be made to the relevant British Standard Code of Practice. The installation must be
carried out by a competent Person and installed in accordance with the current edition of I.S. 813 'Domestic Gas Installations', the current Building
Regulations and reference should be made to the current ETCI rules for electrical installation.
All systems must be thoroughly flushed and treated with inhibitor (see
Codes of Practice - refer to the most recent version
In IE the following Codes of Practice apply:
Standard
Scope
I.S. 813
Domestic Gas Installations.
The following standards give valuable additional information;
BS 5546
Installation of hot water supplies for domestic purposes.
BS EN 12828
Heating systems in buildings.
BS EN 14336
Installation & commissioning of water based heating systems
BS 7074
Expansion vessels and ancillary equipment for sealed water systems.
BS 7593
Treatment of water in domestic hot water central heating systems.
page 3
Safe Manual Handling
General
The following advice should be adhered to, from when first handling the boiler to the final stages of installation, and also during maintenance.
section
6.2).

Advertisement

loading
Need help?

Need help?

Do you have a question about the Megaflo System HE IE Series and is the answer not in the manual?

This manual is also suitable for:

Megaflo system 15 he ieMegaflo system 18 he ieMegaflo system 24 he ieMegaflo system 28 he ieMegaflo system 32 he ieMegaflo system 24 he ie lpg ... Show all