High Beam Bulbs; Parking Light Bulb - APRILIA PEGASO 650 IE - PART2 02-2001 Manual

HIGH BEAM BULBS

Move the protection element (4) with
your hands.
Grasp the electric terminal (5), pull it and
disconnect it from the bulb (1).
Release the check spring (6) positioned
at the rear of the bulb socket (7).
Extract the bulb (1) from its seat and re-
place it with a new one of the same type.
NOTE
Insert the bulb in the bulb socket,
making the relevant positioning seats coin-
cide.

PARKING LIGHT BULB

Move the protection element (8) with
your hands.
a
CAUTION
To extract the bulb socket, do not pull
the electric wires.
Grasp the parking light bulb socket (9),
pull it and remove it from its seat.
Withdraw the bulb (2) and replace it with
one of the same type.
LOW BEAM BULB/HIGH BEAM
Move the protection element (10) with
your hands.
a
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
Grasp the bulb electric connector (11),
pull it and disconnect it from the bulb (3).
Rotate the bulb socket (12) anticlockwise
and extract it from its seat.
Press the bulb (3) slightly and rotate it
anticlockwise.
Extract the bulb (3) from its seat and re-
place it with a new one of the same type.
NOTE
Insert the bulb in the bulb socket,
making the appropriate tangs (13) coincide
with the relevant seats (14) on the reflec-
tor.
use and maintenance Pegaso 650 I.E. 95