Download
Share
Print this page
HIKVISION DS-2TB3217-6/W User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2TB3217-6/W
  6. User manual
HIKVISION DS-2TB3217-6/W User Manual

HIKVISION DS-2TB3217-6/W User Manual

Temperature screening network separated camera
Hide thumbs

Advertisement

Quick Links

Download this manual
Temperature Screening Network Separated
Camera
User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the DS-2TB3217-6/W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-2TB3217-6/W

Summary of Contents for HIKVISION DS-2TB3217-6/W

  • Page 1 Temperature Screening Network Separated Camera User Manual...
  • Page 2 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 3 Temperature Screening Network Separated Camera User Manual PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
  • Page 4 Temperature Screening Network Separated Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance...
  • Page 5 Temperature Screening Network Separated Camera User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. Laws and Regulations ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 6 Temperature Screening Network Separated Camera User Manual example, in the case of some lithium battery types). ● DO NOT dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. ●...
  • Page 7 Temperature Screening Network Separated Camera User Manual liquids, such as vases, shall be placed on the equipment. ● No naked flame sources, such as lighted candles, should be placed on the equipment. ● Provide a surge suppressor at the inlet opening of the equipment under special conditions such as the mountain top, iron tower, and forest.
  • Page 8 Temperature Screening Network Separated Camera User Manual Contents Chapter 1 Overview ........................1 1.1 Brief Description ....................... 1 1.2 Function ..........................1 Chapter 2 Device Activation and Accessing ..................2 2.1 Activate the Device via SADP .................... 2 2.2 Activate the Device via Browser ..................2 2.3 Login ..........................
  • Page 9 Temperature Screening Network Separated Camera User Manual 4.3.1 Overlay and Capture .................... 17 4.3.2 Set Shield Region ....................18 4.3.3 Face Capture Advanced Settings ................18 Chapter 5 Event and Alarm......................20 5.1 Set Video Tampering Alarm .................... 20 5.2 Set Alarm Input ....................... 21 5.3 Set Exception Alarm ......................
  • Page 10 Temperature Screening Network Separated Camera User Manual Chapter 8 Video and Audio ......................32 8.1 Video Settings ......................... 32 8.1.1 Stream Type ......................32 8.1.2 Video Type ......................32 8.1.3 Resolution ......................32 8.1.4 Bitrate Type and Max. Bitrate ................33 8.1.5 Video Quality .......................
  • Page 11 Temperature Screening Network Separated Camera User Manual 8.3 OSD ..........................41 8.4 Set Picture in Picture ....................... 42 8.5 Set Privacy Mask ......................42 8.6 Overlay Picture ....................... 43 8.7 Set Manual DPC (Defective Pixel Correction) ..............43 Chapter 9 Video Recording and Picture Capture ................44 9.1 Storage Settings ......................
  • Page 12 Temperature Screening Network Separated Camera User Manual 10.9 Set ISUP ......................... 56 10.10 Set Open Network Video Interface ................56 10.11 Set HTTP Listening ....................... 56 Chapter 11 System and Security ....................58 11.1 View Device Information ....................58 11.2 Search and Manage Log ....................58 11.3 Import and Export Configuration File................
  • Page 13 Temperature Screening Network Separated Camera User Manual 12.3 Device Communication Matrix..................68...
  • Page 14 Temperature Screening Network Separated Camera User Manual Chapter 1 Overview 1.1 Brief Description The Temperature Screening Thermal & Optical Bi-Spectrum Network Separated Camera is a camera with function of high accuracy temperature measurement. With built-in high sensitivity sensor and passive infrared imaging, the camera is able to measure object's temperature at a high accuracy.
  • Page 15 2.1 Activate the Device via SADP Search and activate the online devices via SADP software. Before You Start Access www.hikvision.com to get SADP software to install. Steps 1. Connect the device to network using the network cable. 2. Run SADP software to search the online devices.
  • Page 16 Temperature Screening Network Separated Camera User Manual Note The default IP address of the device is 192.168.1.64. You can set the IP address of the PC from 192.168.1.2 to 192.168.1.253 (except 192.168.1.64). For example, you can set the IP address of the PC to 192.168.1.100.
  • Page 17 Temperature Screening Network Separated Camera User Manual Lock. Illegal Login Attempts and Locking Duration are configurable. Illegal Login Attempts When your login attempts with the wrong password reach the set times, the device is locked. Locking Duration The device releases the lock after the setting duration.
  • Page 18 Temperature Screening Network Separated Camera User Manual Chapter 3 Temperature Measurement When you enable this function, the device measures the actual temperature of the scene. It alarms when temperature exceeds the temperature threshold value. 3.1 Notice This part introduces the notices of configuring temperature measurement function. ●...
  • Page 19 Temperature Screening Network Separated Camera User Manual 3.2 Thermography Configuration Flow Chart This part introduces the process of configuring temperature measurement. Figure 3-1 Thermography Configuration Flow Chart...
  • Page 20 Temperature Screening Network Separated Camera User Manual Note Please refer to the Quick Start Guide for detailed information of Installation part in the flow chart. 3.3 Automatic Thermography Configure the temperature measurement parameters and temperature measurement rules. The device can measure the actual temperature and output alarms when temperature exceeds the alarm threshold value.
  • Page 21 Temperature Screening Network Separated Camera User Manual Version View the version of current algorithm. Calibration File Version View the version of calibration file. Emissivity Set the emissivity of the target. The emissivity of the surface of a material is its effectiveness in emitting energy as thermal radiation.
  • Page 22 Temperature Screening Network Separated Camera User Manual 5. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 6. Click Save. The maximum and minimum temperature will be displayed on the live view. Note Go toImage →...
  • Page 23 Temperature Screening Network Separated Camera User Manual Line Please refer to Line Thermographyfor detailed configuration. Area Please refer to Area Thermographyfor detailed configuration. 3. Configure the temperature measurement parameters. Emissivity Set the emissivity of the target. The emissivity of the surface of a material is its effectiveness in emitting energy as thermal radiation.
  • Page 24 Temperature Screening Network Separated Camera User Manual 3.3.5 Point Thermography Configure the temperature measurement rule and click any point in live view to monitor the temperature. Steps 1. Click in the live view and a cross cursor showed on the interface. 2.
  • Page 25 Temperature Screening Network Separated Camera User Manual (Average Temperature), set the Pre-Alarm Temperature to 50 °C, and set the Alarm Temperature to 55 °C. The device pre-alarms when its average temperature is higher than 50 °C and alarms when its average temperature is higher than 55 °C. Filtering Time It refers to the duration time after the target temperature reaches or exceeds the pre-alarm temperature/alarm temperature.
  • Page 26 Temperature Screening Network Separated Camera User Manual Refer to Common Material Emissivity Reference to set the emissivity of black body. Distance The distance between the black body and the device. Temperature Enter the temperature of the black body. Note DO NOT need to set the parameters if there is no black body in the scene 5.
  • Page 27 Temperature Screening Network Separated Camera User Manual Chapter 4 Temperature Screening The function can detect temperature of human face or body in the scene, and output alarm if the temperature is higher than the setting value. 4.1 Set Thermography Parameters Configure the parameters of temperature measurement.
  • Page 28 Temperature Screening Network Separated Camera User Manual View the version of calibration file. Emissivity Set the emissivity of the target. The emissivity of the surface of a material is its effectiveness in emitting energy as thermal radiation. Different objects have different emissivity. Refer to Common Material Emissivity Reference to search for the target emissivity..
  • Page 29 Temperature Screening Network Separated Camera User Manual 7. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 4.2.2 Set Parameters in Optical Channel Before You Start Enable Display Temperature Info. on Stream in basic settings. Steps 1.
  • Page 30 Temperature Screening Network Separated Camera User Manual distance trigger the capture. Generation Speed It refers to the target generation speed. The higher the value is, the easier the target can be detected. Sensitivity It refers to face detection sensitivity. Alarm When Temperature is Above It refers to the temperature alarm threshold.
  • Page 31 Temperature Screening Network Separated Camera User Manual Shot. If you select Custom, you can define detailed picture width and height of a picture freely. If the captured pictures should have the same picture height, check Fixed Value and input desired picture height. Background Picture Settings Comparing to target picture, background picture is the scene image offers extra environmental information.
  • Page 32 Temperature Screening Network Separated Camera User Manual Feature stands for the feature information the algorithm can tell from face pictures. For example, facial expression, wearing glasses or not, etc. Check the function to upload the information. Best Shot The device captures the target picture with the highest score after setting the parameters. Capture Times It refers to the capture times a face will be captured during its stay in the configured area.
  • Page 33 Temperature Screening Network Separated Camera User Manual Chapter 5 Event and Alarm This part introduces the configuration of events. The device takes certain response to triggered alarm. 5.1 Set Video Tampering Alarm When the configured area is covered and cannot be monitored normally, the alarm is triggered and the device takes certain alarm response actions.
  • Page 34 Temperature Screening Network Separated Camera User Manual Figure 5-1 Set Video Tampering Area 6. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting linkage method. 7. Click Save. 5.2 Set Alarm Input Alarm signal from the external device triggers the corresponding actions of the current device. Before You Start Make sure the external alarm device is connected.
  • Page 35 Temperature Screening Network Separated Camera User Manual 6. Click Save. 5.3 Set Exception Alarm Exception such as network disconnection can trigger the device to take corresponding action. Steps 1. Go to Configuration → Event → Basic Event → Exception. 2. Select Exception Type. HDD Full The HDD storage is full.
  • Page 36 Temperature Screening Network Separated Camera User Manual recommended to set as the average sound intensity in the environment. The louder the environment sound, the higher the value should be. You can adjust it according to the real environment. Sudden Decrease of Sound Intensity Detection Detect sudden decrease of sound intensity.
  • Page 37 Temperature Screening Network Separated Camera User Manual Chapter 6 Arming Schedule and Alarm Linkage Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled time. 6.1 Set Arming Schedule Set the valid time of the device tasks.
  • Page 38 Temperature Screening Network Separated Camera User Manual Manual Alarm You can trigger an alarm output manually. Steps 1. Set the manual alarm parameters. Alarm Output No. Select the alarm output No. according to the alarm interface connected to the external alarm device.
  • Page 39 Temperature Screening Network Separated Camera User Manual Refer to Set Memory Card for memory card storage configuration. 6.2.3 Send Email Check Send Email, and the device sends an email to the designated addresses with alarm information when an alarm event is detected. For email settings, refer to Set Email.
  • Page 40 Temperature Screening Network Separated Camera User Manual 6.2.4 Notify Surveillance Center Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center when an alarm event is detected. 6.2.5 Trigger Recording Check Trigger Recording, and the device records the video about the detected alarm event. For device with more than one camera channels, you can set one or more channels to take recordings if needed.
  • Page 41 Temperature Screening Network Separated Camera User Manual Chapter 7 Live View It introduces the live view parameters, function icons and transmission parameters settings. 7.1 Live View Parameters The supported functions vary depending on the model. Note For multichannel devices, select the desired channel first before live view settings. 7.1.1 Window Division ●...
  • Page 42 Temperature Screening Network Separated Camera User Manual 7.1.5 View Previous/Next Page When the number of channels surpasses that of live view window division, this function can switch live view among multiple channels. Click to switch live view among multiple channels. 7.1.6 Full Screen This function is used to view the image in full screen mode.
  • Page 43 Temperature Screening Network Separated Camera User Manual – For VCA settings, see , Temperature Measurement. Note The function is only supported by certain models. 7.1.12 Lens Parameters Adjustment It is used to adjust the lens focus, zoom and iris. Zoom ●...
  • Page 44 Temperature Screening Network Separated Camera User Manual MULTICAST is suitable for the situation that there are multiple clients. You should set the multicast address for them before selection. HTTP HTTP is suitable for the situation that the third-party needs to get the stream from the device.
  • Page 45 Temperature Screening Network Separated Camera User Manual Chapter 8 Video and Audio This part introduces the configuration of video and audio related parameters. 8.1 Video Settings This part introduces the settings of video parameters, such as, stream type, video encoding, and resolution.
  • Page 46 Temperature Screening Network Separated Camera User Manual and storage. 8.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and transmitted at a comparatively fixed bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device automatically adjust the bitrate under the set Max.
  • Page 47 Temperature Screening Network Separated Camera User Manual can estimate the HDD consumption by its maximum average bitrate. Compared to H.264, H.264+ reduces storage by up to 50% with the same maximum bitrate in most scenes. When H.264+ is enabled, Max. Average Bitrate is configurable. The device gives a recommended max.
  • Page 48 Temperature Screening Network Separated Camera User Manual compression standard. The objective of the SVC standardization has been to enable the encoding of a high-quality video bitstream that contains one or more subset bitstreams that can themselves be decoded with a complexity and reconstruction quality similar to that achieved using the existing H.264 or H.265 design with the same quantity of data as in the subset bitstream.
  • Page 49 Temperature Screening Network Separated Camera User Manual Set Audio Input to LineIn when the device connects to the LineIn audio input device with the high output power, such as MP3, synthesizer or active pickup. Set Audio Input to MicIn when the device connects to the MicIn audio input device with the low output power, such as microphone or passive pickup.
  • Page 50 Temperature Screening Network Separated Camera User Manual 3. Select the channel No. according to your need. 4. Select Stream Type. 5. Select Region No. in Fixed Region to draw ROI region. 1) Click Drawing. 2) Click and drag the mouse on the view screen to draw the fixed region. 3) Click Stop Drawing.
  • Page 51 Temperature Screening Network Separated Camera User Manual Click Correct to optimize the image once. Note It is a normal phenomenon that short video freezing might occur during the process of Background Correction and Manual Correction. Thermal AGC Mode Choose the AGC mode according to different scenes to balance and improve the image quality. ●...
  • Page 52 Temperature Screening Network Separated Camera User Manual 8.2.5 BLC If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC (backlight compensation) compensates light to the object in the front to make it clear. If BLC mode is set as Custom, you can draw a red rectangle on the live view image as the BLC area.
  • Page 53 Temperature Screening Network Separated Camera User Manual Result The live view displays the image with palette. 8.2.10 Set Target Color You can set the color of the targets in different temperature ranges to identify the target quickly. Steps 1. Go to Configuration → Image → Display Settings. 2.
  • Page 54 Temperature Screening Network Separated Camera User Manual 8.2.13 Mirror When the live view image is the reverse of the actual scene, this function helps to display the image normally. Select the mirror mode as needed. Note The video recording will be shortly interrupted when the function is enabled. 8.2.14 Digital Zoom You can zoom in the image.
  • Page 55 Temperature Screening Network Separated Camera User Manual 8.4 Set Picture in Picture You can overlay the images of two channels and view the image of two channels at the same time. Steps 1. Select a channel number. 2. Select the picture in picture mode. Normal Mode Disable picture in picture mode.
  • Page 56 Temperature Screening Network Separated Camera User Manual 8.6 Overlay Picture Overlay a customized picture on live view. Before You Start The picture to overlay has to be in BMP format with 24-bit, and the maximum picture size is 128 × 128 pixel.
  • Page 57 Temperature Screening Network Separated Camera User Manual Chapter 9 Video Recording and Picture Capture This part introduces the operations of capturing video clips and snapshots, playback, and downloading captured files. 9.1 Storage Settings This part introduces the configuration of several common storage paths. 9.1.1 Set Memory Card If you choose to store the files to memory card, make sure you insert and format the memory card in advance.
  • Page 58 Temperature Screening Network Separated Camera User Manual The saving path of network disk files. Mounting Type Select file system protocol according to the operation system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected.
  • Page 59 Temperature Screening Network Separated Camera User Manual 1. Go to Configuration → Storage → Storage Management → Cloud Storage. 2. Check Enable Cloud Storage. 3. Set basic parameters. Protocol Version The protocol version of the cloud storage server. Server IP The IP address of the cloud storage server.
  • Page 60 Temperature Screening Network Separated Camera User Manual 9.2.2 Capture Manually Steps 1. Go to Configuration → Local. 2. Set the Image Format and saving path to for snapshots. JPEG The picture size of this format is comparatively small, which is better for network transmission.
  • Page 61 Temperature Screening Network Separated Camera User Manual Chapter 10 Network Settings 10.1 TCP/IP TCP/IP settings must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.
  • Page 62 Temperature Screening Network Separated Camera User Manual Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required information. It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer transaction.
  • Page 63 Temperature Screening Network Separated Camera User Manual 10.3 Port Mapping By setting port mapping, you can access devices through the specified port. Before You Start When the ports in the device are the same as those of other devices in the network, refer to Port to modify the device ports.
  • Page 64 Temperature Screening Network Separated Camera User Manual 10.3.3 Set Port Mapping on Router The following settings are for a certain router. The settings vary depending on different models of routers. Steps 1. Select the WAN Connection Type. 2. Set the IP Address, Subnet Mask and other network parameters of the router. 3.
  • Page 65 Temperature Screening Network Separated Camera User Manual 10.4 Multicast Multicast is group communication where data transmission is addressed to a group of destination devices simultaneously. After setting multicast, you can send the source data efficiently to multiple receivers. Go to Configuration → Network → Basic Settings → Multicast for the multicast settings. IP Address It stands for the address of multicast host.
  • Page 66 Temperature Screening Network Separated Camera User Manual can be mapped to a domain name resolution server to realize the network access via domain name. Before You Start Registration on the DDNS server is required before configuring the DDNS settings of the device. Steps 1.
  • Page 67 Temperature Screening Network Separated Camera User Manual Confirm Input your dial-up password again. 4. Click Save. 5. Access the device. By Browsers Enter the WAN dynamic IP address in the browser address bar to access the device. By Client Software Add the WAN dynamic IP address to the client software.
  • Page 68 1. Get and install Hik-Connect application by the following ways. Visit https://appstore.hikvision.com to download the application according to your mobile phone system.Visit the official site of our company. Then go to Support → Tools → Hikvision App Store.Scan the QR code below to download the application.
  • Page 69 Temperature Screening Network Separated Camera User Manual 2. Start the application and register for a Hik-Connect user account. 3. Log in after registration. 4. In the app, tap "+" on the upper-right corner and then scan the QR code of the camera to add the camera.
  • Page 70 Temperature Screening Network Separated Camera User Manual destination IP or host name should support the HTTP data transmission. Steps 1. Go to Configuration → Network → Advanced Settings → HTTP Listening. 2. Input Destination IP or Host Name, URL, and Port. 3.
  • Page 71 Temperature Screening Network Separated Camera User Manual Chapter 11 System and Security It introduces system maintenance, system settings and security management, and explains how to configure relevant parameters. 11.1 View Device Information You can view device information, such as Device No., Model, Serial No. and Firmware Version. Enter Configuration →...
  • Page 72 Temperature Screening Network Separated Camera User Manual 11.4 Export Diagnose Information Diagnose information includes running log, system information, hardware information. Go to Configuration → System → Maintenance → Upgrade & Maintenance, and click Diagnose Information to export diagnose information of the device. 11.5 Reboot You can reboot the device via browser.
  • Page 73 Temperature Screening Network Separated Camera User Manual 2. Choose one method to upgrade. Firmware Locate the exact path of the upgrade file. Firmware Directory Locate the directory which the upgrade file belongs to. 3. Click Browse to select the upgrade file. 4.
  • Page 74 Temperature Screening Network Separated Camera User Manual Note Server Address is NTP server IP address. 5. Click Test to test server connection. 6. Click Save. 11.9.3 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function.
  • Page 75 Temperature Screening Network Separated Camera User Manual Note You should keep the parameters of the device and the computer or terminal all the same. 3. Click Save. 11.12 Set Same Unit Set the same temperature unit and distance unit. When you enable this function, the unit cannot be configured separately in other setting pages Steps 1.
  • Page 76 Temperature Screening Network Separated Camera User Manual WEB Digest Algorithm MD5, SHA256 and MD5/SHA256 encrypted algorithm in WEB authentication. If you enable the digest algorithm except for MD5, the third-party platform might not be able to log in to the device or enable live view because of compatibility.
  • Page 77 Temperature Screening Network Separated Camera User Manual Forbidden IP addresses in the list cannot access the device. Allowed Only IP addresses in the list can access the device. 4. Edit the IP address filter list. Add a new IP address to the list. Modify Modify the selected IP address in the list.
  • Page 78 Temperature Screening Network Separated Camera User Manual via HTTPS protocol to ensure the data transmission security. Steps 1. Select Create certificate request first and continue the installation. 2. Click Create. 3. Follow the prompt to input Country, Hostname/IP, Validity and other parameters. 4.
  • Page 79 Temperature Screening Network Separated Camera User Manual Management. 11.14 User and Account 11.14.1 Set User Account and Permission The administrator can add, modify, or delete other accounts, and grant different permission to different user levels. Caution To increase security of using the device on the network, please change the password of your account regularly.
  • Page 80 0.98 Hard Paperboard 0.90 White Paper 0.90 Water 0.96 12.2 Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for Hikvision thermal cameras.
  • Page 81 Temperature Screening Network Separated Camera User Manual 12.3 Device Communication Matrix Scan the following QR code to get device communication matrix. Note that the matrix contains all communication ports of Hikvision thermal cameras.
  • Page 82 UD23006B-A...

This manual is also suitable for:

Ds-2tb3217-3/w