Subscribe to Our Youtube Channel
Related Manuals for AVF XL65UK
Summary of Contents for AVF XL65UK
- Page 1 XL65UK 472263 TV Wall Mount Instruction Booklet Welcome and thank you for choosing Installation is EASY with our step-by-step Video Guide Scan here or visit avf-info.com/vid65uk We’re happy to help! 0333 320 0463 avfgroup.com/support...
- Page 2 Mount your TV in 3 easy steps! Assembly Overview Installation Video Guide Attach the TV Mounting Plate to the TV Attach the Wall Plate to the Wall Hook the TV on to the Mount...
- Page 3 CAUTION Use with products STRONG heavier than capacity VESA may result in instability 100 x100mm SECURE causing possible injury up to 600 x 400mm Suitable Wall Types Solid Concrete Wall W ood St ud Wall You will need " Stud Finder 12mm / 15/32"...
- Page 4 Parts Included No.16 (5/16”) Ø12mm 0333 320 0463 Contact us for help!
- Page 5 TV Fixings 45mm 30mm 16mm You won’t need all these screws. Just use the screws that fit your TV. Keep left over screws in a safe place. Preparing the Wall Bracket Remove the Wall Bracket Covers and safely keep for Step 2C. Push the Wall Bracket Covers out from behind using a screwdriver.
- Page 6 Preparing the TV Mounting Plate Before you can attach the TV mounting plate to your TV you need to remove the plate from your wall mount. TV Mounting Plate Level Lock Screw Remove the Level Lock Screw and safely keep for Step 3A. Remove the TV Mounting Plate.
- Page 7 Measure the distance between the mounting holes (VESA) on the back of your TV. If the distance is greater than 200mm then proceed straight to Step 1C. • • If the distance is 200mm or less than you will need to remove the four VESA adaptors before proceeding to Step 1C.
- Page 8 Attach the TV Mounting Plate to the TV Position the TV Mounting Plate • Position the TV Mounting Plate on the back of your TV. The plate must be level and positioned on the vertical centre line of your TV. •...
- Page 9 Attach the TV Mounting Plate If TV VESA is 200x200mm or less, use holes in the TV Mounting Plate. Select the correct length TV screw. You may need to use Spacers E1 or E2 if the screws are too long or the back of your TV is not flat.
- Page 10 TV Height Calculator Determine the exact position for your drill points with our easy online tool at avf-info.com/tvhc65uk Determine the Height for Your Drill Points • Measure A from the bottom of the TV mounting plate to the bottom of your TV as shown.
- Page 11 Solid Concrete Wall • Use the Wall Bracket as a tempalte to mark the drill points on your wall. • If fixing the Wall Plate to a solid wall use the six fixing holes shown. W ood St ud Wall •...
- Page 12 Attach the Wall Plate to the Wall Solid Concrete Wall 140mm (5½”) Min. 75mm (3") Remove dust from holes. 12mm / 15/32" Masonry 140mm (5½”) Min. It can be difficult to accurately drill holes with a large drill bit. Try drilling 6mm pilot holes first.
- Page 13 Lubricate screw thread with soap. No.16 (5/16”) Ø12mm DO NOT overtighten screws. Tighten screws by hand only. avfgroup.com/support...
- Page 14 W ood St ud Wall 12.5mm (1/2”) Max 50 x 100mm (2 x 4”) Min Ensure you drill in the centre of the wood stud. 75mm (3") 5mm / 13/64" Wood 0333 320 0463 Contact us for help!
- Page 15 DO NOT use wall plugs in a wood stud wall. Lubricate screw thread with soap. No.16 (5/16”) DO NOT overtighten screws. Tighten screws by hand only. avfgroup.com/support...
- Page 16 Fitting the Wall Plate Covers 0333 320 0463 Contact us for help!
- Page 17 Attach the Mount Arm Position the Mount Arm where you want the centre of your TV, when flat against the wall. You can adjust this later if required. Fully tighten both screws to lock Mount Arm to Wall Plate. avfgroup.com/support...
- Page 18 Connect the TV to the Mount Arm Reuse Level Lock Screw saved in step 1B. When the TV is level, ensure the Level Lock Screw is fully tightened. To remove the TV, reverse this procedure. 0333 320 0463 Contact us for help!
- Page 19 Cable Management Push cables through the slots in the arms to keep them neat and tidy. avfgroup.com/support...
- Page 20 Post-Installation Adjustment TV Levelling Loosen the Level Lock Screw, adjust your TV until it is level, then re-tighten the screw. 0333 320 0463 Contact us for help!
- Page 21 Tilt DO NOT loosen VESA Adaptor thumb nuts. If you feel the tilt is too stiff or too loose you can adjust the Tilt Thumb Nuts to achieve perfect tilt resistance. You must adjust both nuts equally. You can also lock the tilt if required.
- Page 22 Side-to-Side Positioning To help position your TV perfectly on the wall you can slide the Mount Arm side-to-side and secure it anywhere along the Wall Plate. Remove TV before starting. Loosen both locking screws. Slide arm into the required position and re-tighten both locking screws. Reconnect your TV.
- Page 23 TV Motion Adjustment • If you feel the TV rotation is too stiff or too loose you can change the swivel resistance by adjusting the nut located at the TV end of the arms. Adjust to maximum up tilt for easier access. •...
- Page 24 YEAR WARRANTY AVF warrants that the product is free from defects in material and workmanship, as long as the product is owned by the original consumer purchaser. If, during the stated warranty of this product, it proves to be defective, AVF will remedy the defect by either repairing or replacing the defective part or, replacing the entire product.
Need help?
Do you have a question about the XL65UK and is the answer not in the manual?
Questions and answers