Simplicity S67 Owner's Manual page 6

GETTING STARTED
Mounting the Wall Charging Station
1. Unpack the vacuum box and remove all contents. Find the charging wall mount,
accessory holder, screws/hardware, and charging cord. You may need to use a
drill and/or screwdriver (both not included) to install the wall mount.
NOTE: Do not plug the charging cord into the wall mount or an electrical outlet
during assembly.
2. Attach the accessory holder to the base of the wall mount with a screwdriver.
The hardware is included in the packaging.
3. Select a location for the wall mount and ensure that there is no pipework (gas,
air, or water) electrical cables, wires or ductwork directly behind the mounting
location.
4. Measure height to ensure there is enough space for the fully assembled
vacuum to hang from wall mount. Check for proximity to outlet for convenience
in charging.
NOTE: Vacuum can be charged directly on the wall mount if charging cord is
plugged into the bottom of the mount.
5. Attach the wall mount to preferred location with preferred tools. Use the
provided hardware.
6. Once the wall mount is secured to the wall you may plug the charging cord into
the opening at the bottom of the wall mount to charge vacuum.
7. Insert accessories (crevice tool and dusting brush) into the holder on the wall
mount. You will hear a clicking sound when securely locked in place.
NOTE: Press the button release to remove the accessory from the holder.
4