Back To Factory Defaults; Figure 243 Configuration Upload Successful; Figure 244 Network Temporarily Disconnected; Figure 245 Configuration Upload Error - ZyXEL Communications ZYWALL P1 User Manual

After you see a "restore configuration successful" screen, you must then wait one minute
before logging into the ZyWALL again.

Figure 243 Configuration Upload Successful

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.

Figure 244 Network Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.167.1). See
your Quick Start Guide for details on how to set up your computer's IP address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 245 Configuration Upload Error

23.18.3 Back to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the
ZyWALL to its factory defaults as shown on the screen. The following warning screen
appears.
ZyWALL P1 User's Guide
Chapter 23 Maintenance
383