Home Screen: Router Mode; Figure 8 Web Configurator Home Screen In Router Mode; Table 5 Web Configurator Home Screen In Router Mode - ZyXEL Communications ZYWALL P1 User Manual

Chapter 2 Introducing the Web Configurator
Table 4 Screens Summary (continued)
LINK
MAINTENANCE
LOGOUT

2.3.4 HOME Screen: Router Mode

The following screen displays when the ZyWALL is set to router mode. This screen displays
general status information about the ZyWALL. The ZyWALL is set to router mode by default.

Figure 8 Web Configurator HOME Screen in Router Mode

The following table describes the labels in this screen.

Table 5 Web Configurator HOME Screen in Router Mode

LABEL
Automatic Refresh
Interval
Refresh
50
TAB FUNCTION
General This screen contains administrative settings, including the IP
system DNS server IP addresses.
Password Use this screen to change your password.
Time and Date Use this screen to change your ZyWALL's time and date.
Device Mode Use this screen to configure and have your ZyWALL work as a
router or a bridge.
F/W Upload Use this screen to upload firmware to your ZyWALL
Backup & Use this screen to backup and restore the configuration or reset
Restore the factory defaults to your ZyWALL.
Restart This screen allows you to reboot the ZyWALL without turning the
power off.
Click this label to exit the web configurator.
DESCRIPTION
Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not update
the screen statistics.
Click this button to update the status screen statistics immediately.
ZyWALL P1 User's Guide