Integration: Netscreen+Zywall Ssl10 - ZyXEL Communications ZYWALL SSL 10 Support Notes

3.4 Integration: Netscreen+ZyWALL SSL10

We would show you how to integrate a ZyWALL SSL10 with a Netscreen 5GT device in
the example.
Configuration information in this example:
To achieve this, we have to complete the following tasks:
Configure on ZyWALL SSL 10
1. Using Wizard to setup the initial SSL VPN access network.
Configure on 3
1. Configure the proper IP address for WAN, LAN, DMZ interfaces.
2. Configure port 443 forwarding to ZyWALL SSL10 for SSL traffic.
3. Change the system management port for HTTPS from 443 to others to avoid
conflict with SSL VPN port forwarding.
See the following step-by-step configuration.
Configuration on ZyWALL SSL10
Please refer to the chapter one to configure ZyWALL SSL10 in DMZ mode.
Configuration on Netscreen 5GT
Step1. Check if the WAN, LAN, DMZ IP addresses have been proper configured.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
rd
party's Firewall
ZyWALL SSL 10 Support Notes
71