ZyXEL Communications ZYWALL SSL 10 Support Notes page 15

ZyWALL SSL 10 Support Notes
7) Then configure the VPN network and the remote users IP address pool as below.
Note1:
In this example, we have the IP arrangement as shown in the picture below. The
right mark in blue color, the "VPN network" is as the destination you plan to
allow SSL VPN users to access to(as the "LAN zone"). The "Remote users IP
address pool" means the IP address will be assigned to the remote SSL VPN users
from the device in full tunnel mode.
Note2:
The remote users IP address pool should be different than VPN network. Like in
this example, we use 192.168.1.0/24 for VPN network and remote users IP pool
ranging from 192.168.10.200 to 192.168.10.250.
15
All contents copyright (c) 2006 ZyXEL Communications Corporation.