ZyXEL Communications ZYWALL SSL 10 Support Notes page 80

ZyWALL SSL 10 Support Notes
Step2. Make sure firewall rule allow SSL traffic from WAN to DMZ.
Go to menu Security > Firewall, the traffic from WAN1 to DMZ is permitted by default as
following figure.
However, if you found it's "Reject" or "Drop", you need to create one exception rule in
Rule Summary. Choose packet direction "WAN1 to DMZ", and press Insert button to
enter the information. After that, you will get the result as following figure.
Step3. Change the remote management port on ZyWALL UTM
1). Switch to menu ADVANCED > REMOTE MGMT > WWW, change the ZyWALL
80
All contents copyright (c) 2006 ZyXEL Communications Corporation.