Faq; Zywall General Faq; A01. How To Access Zywall Ssl10 Web Gui; A02. What Do I Need To Use The Zywall - ZyXEL Communications ZYWALL SSL 10 Support Notes

Integrated ssl-vpn appliance

Hide thumbs Also See for ZYWALL SSL 10:

Table of Contents

ZyWALL SSL 10 Support Notes

5. FAQ

A. ZyWALL General FAQ

You can connect your PC to ZyWALL SSL10 LAN port with Ethernet cable and get the IP

address automatically from DHCP. Open web browser and connect to its GUI through IP

address (default is http://192.168.1.1). The default administration username is "admin", and

password is "1234".

You need an xDSL modem or cable modem with an Ethernet port to use the ZyWALL. The

ZyWALL has two Ethernet ports: LAN port and WAN port. You should connect the

computer to the LAN port and connect the external modem to the WAN port. If the ISP uses

PPPoE Authentication you need the user account to enter in the ZyWALL.

PPPoE stands for Point-to-Point Protocol over Ethernet that is an IETF draft standard

specifying how a computer interacts with a broadband modem (i.e. xDSL, cable, wireless,

etc.) to achieve access to the high-speed data networks via a familiar PPP dialer such as

'Dial-Up Networking' user interface. PPPoE supports a broad range of existing applications

and service including authentication, accounting, secure access and configuration

management.

Table of Contents