4.3.1 WEP Encryption
The following table describes the labels in this screen.
LABEL
WEP
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Authentication
Select Share to authenticate the G-162 to an AP or peer WLAN device using the key(s)
configured below. Otherwise, select Open if you want to connect to any AP or peer
device without sharing a key.
Refer to Section 4.2 for more information.
Pass Phrase
As you enter the passphrase, the G-162 automatically generates four different WEP keys
and displays one in the key field below.
Refer to Section 4.1.1 for more information.
Transmit Key
Select a default WEP key to use for data encryption. The key displays in the field below.
Security Settings
Figure 4-1 Security Settings: WEP
Table 4-2 Security Settings: WEP
ZyXEL G-162 User's Guide
DESCRIPTION
4-3