Site Survey - ZyXEL Communications ZYAIR G-162 User Manual

ZyXEL G-162 User's Guide

1.8.1 Site Survey

After you install the ZyXEL Utility and then insert the G-162, follow the steps below to connect to a
network using the Site Survey screen.
1. Make sure a wireless network is available and within range.
2. Open the ZyXEL Utility and click the Site Survey tab to open the screen as shown next.
3. Click Scan to search for available wireless networks.
4. To join a network, either click an SSID in the table and then click Connect or double-click an
SSID.
5. If the wireless security is activated for the selected wireless network, the Security Settings screen
displays. This screen varies according to the network's encryption method. Configure the same
security settings as the associated network.
1-6
Figure 1-5 Site Survey
Getting Started