Table 7 Station Mode: Site Survey (continued)
LABEL
Connect
Site Info
Network Type
Channel
Encryption
MAC address
Surveyed at
4.3.1 Security Settings
When you configure the AG-320 to connect to a network with wireless security activated and
the security settings are disabled on the AG-320, the screen varies according to the encryption
method used by the selected network.
4.3.1.1 WEP Encryption
Figure 27 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
Table 8 Station Mode: Security Setting: WEP
LABEL
Security Setting
WEP
Encryption Type
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
Click Connect to associate to the selected wireless device.
Click an entry in the Available Network List table to display the information of the
selected wireless device.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
This field displays the channel number used by each wireless device.
This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
802.1x, WPA2, WPA2-PSK) or inactive (Disabled).
This field displays the MAC address of the wireless device.
This field displays the time when the wireless device is scanned.
DESCRIPTION
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select an authentication method. Choices are Auto, Open System and Shared
Key.
Refer to
Section 3.2.3.1.2 on page 39
ZyXEL AG-320 User's Guide
for more information.
49