ZyXEL G-162 User's Guide
4. If you change the SSID or the keys on the AP after using OTIST, you need to run OTIST again or
enter them manually in the wireless client(s).
5. If you configure OTIST to generate a WPA(2)-PSK key, this key changes each time you run
OTIST. Therefore, if a new wireless client joins your wireless network, you need to run OTIST on
the AP and ALL the wireless clients again.
6.2
Configuring the Adapter Screen
Use the Adapter screen to set a transfer rate, enable power saving and activate OTIST.
The following table describes the labels in this screen.
LABEL
Adapter Setting
6-4
Figure 6-1 Adapter
Table 6-1 Adapter
DESCRIPTION
Adapter