Set Up A Wireless Network - ZyXEL Communications VSG1432-B101 - QUICK START GUIDE V1.10 Quick Start Manual

Set Up a Wireless Network

You can set up a wireless network using the following methods:
Using Wireless Protected Setup (WPS)
Press the WPS button on the VSG1432-B101's front panel for more than
5 seconds to turn the WPS function on.
Follow these steps to add a WPS-enabled device to the wireless network
using the WPS/WLAN button.
Place the devices you want to connect near
1
one another.
1
Press the WPS button on the VSG1432-
2
B101.
The WPS light blinks green and orange.
Press the WPS button on a compatible
3
device within 2 minutes of pressing the
button on the VSG1432-B101.
The WPS light on the VSG1432-B101
shines steadily when connected.
VSG1432-B101 Series
9