Supported Mibs; Snmp Traps; Configuring Snmp; Figure 120 Remote Management: Snmp - ZyXEL Communications P660HW-DX V2 - V3.40 User Manual

15.7.1 Supported MIBs

The ZyXEL Device supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of
the MIBs is to let administrators collect statistical data and monitor status and performance.

15.7.2 SNMP Traps

The ZyXEL Device will send traps to the SNMP manager when any one of the following
events occurs:

Table 85 SNMP Traps

TRAP NAME
TRAP #
0 coldStart (defined in RFC-1215)
1 warmStart (defined in RFC-1215)
6 whyReboot (defined in ZYXEL-
MIB)
6a For intentional reboot:
6b For fatal error:

15.7.3 Configuring SNMP

To change your ZyXEL Device's SNMP settings, click Advanced > Remote MGMT >
SNMP. The screen appears as shown.

Figure 120 Remote Management: SNMP

P-660HW-Dx v2 User's Guide
Chapter 15 Remote Management Configuration
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent with the reason of restart before
rebooting when the system is going to restart (warm
start).
A trap is sent with the message "System reboot by
user!" if reboot is done intentionally, (for example,
download new files, CI command "sys reboot", etc.).
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
209