Table 84 Menu 24.4: System Maintenance - Diagnostic - ZyXEL Communications P-791R V2 - V3.40 User Manual

The following table describes the labels in this screen.

Table 84 Menu 24.4: System Maintenance - Diagnostic

FIELD
Reset xDSL
Ping Host
Reboot System
Command Mode
Host IP Address
Enter the number of the selection you would like to perform or press [ESC] to cancel.
P-791R v2 User's Guide
DESCRIPTION
Enter 1 to reset the DSL connection on the WAN port.
Enter 12 to ping any machine (with an IP address) on your LAN or WAN.
Enter its IP address in the Host IP Address field below.
Enter 11 to reboot the ZyXEL Device.
Enter 22 to go to the Command Interpreter (CI) for further diagnosis. You can
also enter the CI using menu 24.8.
If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Chapter 28 System Information & Diagnosis
239