Starting Otist; Figure 55 Example Wireless Client Otist Screen; Figure 56 Security Key; Figure 57 Otist In Progress (Ap) - ZyXEL Communications P-660HW-T - V2 User Manual

Figure 55 Example Wireless Client OTIST Screen

6.5.2 Starting OTIST

Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to
transfer. You can use the key in this screen to set up WPA-PSK encryption manually for
non-OTIST devices in the wireless network. After reviewing the settings, click OK.

Figure 56 Security Key

2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.

Figure 57 OTIST in Progress (AP)

• In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the
same Setup key). Click OK to go back to the ZyXEL utility main screen.
Chapter 6 Wireless LAN
P-660HW-T v2 User's Guide

Figure 58 OTIST in Progress (Client)

107