Table 93 Packet Filter Logs; Table 94 Icmp Logs - ZyXEL Communications P-660HW-T - V2 User Manual

802.11g wireless adsl 2+ 4-port gateway
Hide thumbs Also See for P-660HW-T - V2:
Table of Contents

Advertisement

P-660HW-T v2 User's Guide
Table 92 TCP Reset Logs (continued)
LOG MESSAGE
Exceed MAX incomplete,
sent TCP RST
Access block, sent TCP
RST

Table 93 Packet Filter Logs

LOG MESSAGE
[TCP | UDP | ICMP | IGMP |
Generic] packet filter
matched (set:%d, rule:%d)

Table 94 ICMP Logs

LOG MESSAGE
Firewall default policy: ICMP
<Packet Direction>, <type:%d>,
<code:%d>
Firewall rule [NOT] match: ICMP
<Packet Direction>, <rule:%d>,
<type:%d>, <code:%d>
Triangle route packet forwarded:
ICMP
Packet without a NAT table entry
blocked: ICMP
Unsupported/out-of-order ICMP:
ICMP
Router reply ICMP packet: ICMP
232
DESCRIPTION
The router sent a TCP reset packet when the number of
incomplete connections (TCP and UDP) exceeded the user-
configured threshold. (Incomplete count is for all TCP and UDP
connections through the firewall.)Note: When the number of
incomplete connections (TCP + UDP) > "Maximum Incomplete
High", the router sends TCP RST packets for TCP connections
and destroys TOS (firewall dynamic sessions) until incomplete
connections < "Maximum Incomplete Low".
The router sends a TCP RST packet and generates this log if you
turn on the firewall TCP reset mechanism (via CI command: "sys
firewall tcprst").
DESCRIPTION
Attempted access matched a configured filter rule (denoted by
its set and rule number) and was blocked or forwarded
according to the rule.
DESCRIPTION
ICMP access matched the default policy and was blocked
or forwarded according to the user's setting. For type and
code details, see
ICMP access matched (or didn't match) a firewall rule
(denoted by its number) and was blocked or forwarded
according to the rule. For type and code details, see
Table 106 on page
The firewall allowed a triangle route session to pass
through.
The router blocked a packet that didn't have a
corresponding NAT table entry.
The firewall does not support this kind of ICMP packets or
the ICMP packets are out of order.
The router sent an ICMP reply packet to the sender.
Table 106 on page
242.
242.
Chapter 18 Logs

Advertisement

Table of Contents
loading

Table of Contents