Advertisement
Quick Links
Page
Contents
2
1.
Safety information
3
2.
Unpacking and preparation
3
3
Installation and start-up
3
3.1 Fixture overview
4
3.2 Installing the fixture
5
3.3 Connecting to mains supply
5
3.4 Connecting the control signal line: DMX / Art-Net
6
3.5 Switching on the fixture and basic SetUp
8
4.
Maintenance
8
4.1 Periodical cleaning & Caution
9
4.2 Battery
10
5.
Dimensions
11
6.
Cause and solution of problems
TAMBORA RAYS
INSTRUCTION MANUAL
INDEX
Congratulations on choosing a Claypaky product!
We thank you for your custom.
Please note that this product, as all the others in the
rich Claypaky range, has been designed and made with
total quality to ensure excellent performance and best
meet your expectations and requirements.
CL2025
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ARRI CLAYPAKY TAMBORA RAYS
Summary of Contents for ARRI CLAYPAKY TAMBORA RAYS
- Page 1 TAMBORA RAYS CL2025 INSTRUCTION MANUAL INDEX Congratulations on choosing a Claypaky product! Page Contents We thank you for your custom. Safety information Please note that this product, as all the others in the rich Claypaky range, has been designed and made with Unpacking and preparation total quality to ensure excellent performance and best Installation and start-up...
- Page 2 1. SAFETY INFORMATION SAFETY INFORMATION IMPORTANT: Claypaky recommends you carefully read and keep the safety information on this product, also available in digital format at the following link: www.claypaky.com Ref: FIS037 – Safety Information Tambora Rays INFORMAZIONI DI SICUREZZA IMPORTANTE: Claypaky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative a questo prodotto, sempre reperibili in versione digitale al seguente link: www.claypaky.com Rif: FIS037 –...
- Page 3 2. UNPACKING AND PREPARATION Packing contents - Fig. 1 3. INSTALLATION AND START-UP 3.1 Fixture overview Functional buttons 5pin DMX LCD Display IN/THRU Battery Fuse 3A Ethernet Anti-moisture valve Main IN Fuse 15A Neutrik PowerCON TRUE1 (IN/OUT) Safety loop ‘ Continue TAMBORA RAYS...
- Page 4 3.2 Installing the fixture Projector installation - Fig. 3 The projector can be installed on a truss, on the ceiling or wall for floor installation is necessary to use the optional accessory part number CA3042000102. WARNING: the safety chain must be installed except when the projector rests on the floor. (Code 105041/001 available upon request). This must be secured to the projector support structure and then hooked to the fastening point at the centre of the fixture.
- Page 5 3.3 Connecting to mains supply Connecting and disconnecting the power cord - Fig. 4 Power Supply Connections to the power mains - Fig. 5 3.4 Connecting the control signal line: DMX / Art-Net DMX 512 DMX 512 Ethernet 5 PIN SCREEN SIGNAL SIGNAL...
- Page 6 3.5 Switching on the fixture and basic SetUp Switching on the projector - Fig. 7 Switch-on the fixture. The projector starts the reset procedure. At the same time, the following information scrolls on the display: Model Firmware Tambora Version X.X.X Rays The control panel (Fig.
- Page 7 Functions of the buttons - Using the menu Menu Return to the top level Confirms the displayed value, or activates the displayed function, or enters the successive menu. Enter Increases the value displayed (with auto-repetitions) or passes to the previous item in a menu. Decreases the value displayed (with auto-repetitions) or passes to the next item in the menu.
- Page 8 4. MAINTENANCE 4.1 Periodical cleaning & Caution WARNING: no alcohol Light collimation system This product contains internal light collimation system. Avoid intense light from any angle. Parts requiring frequent cleaning. CAUTION: • To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the working environment (air humidity, presence of dust, salinity, etc.).
- Page 9 4.2 Battery This product contains a rechargeable battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. TAMBORA RAYS...
- Page 10 5. DIMENSIONS (7.08") (21.14") (9.60") 90° 90° Rotating angle (7.08") (19.56") (7.32") TAMBORA RAYS...
- Page 11 6. CAUSE AND SOLUTION OF PROBLEMS THE PROJECTOR WILL NOT SWITCH ON ELECTRONICS NON-OPERATIONAL TROUBLE DEFECTIVE PROJECTION REDUCED LUMINOSITY POSSIBLE CAUSES CHECKS AND REMEDIES No power supply. Check the power supply voltage. LED burnt out or defective. Call an authorised technician. Signal transmission cable faulty or disconnected.
- Page 12 www.claypaky.com – Service support & Helpdesk: https://e-assist.tech...
Need help?
Do you have a question about the CLAYPAKY TAMBORA RAYS and is the answer not in the manual?
Questions and answers