Festive P051466 Manual

P051466- 90cm dewdrop star fibre optic tree
P051467- 120cm dewdrop star fibre optic tree
P051468- 150cm dewdrop star fibre optic tree
P051469- 180cm dewdrop star fibre optic tree
These instructions are for your safety. Please read them thoroughly before use and retain for future reference. Please see the
additional information on cable label.
Before You Start - No tools required for assembly.
•
Make sure that you have plenty of space and a clean dry place for assembly.
•
Always try to assemble the product as close as possible to the intended location.
•
Remove all plastic bags and dispose of safely.
Positioning Instructions
1) This Fibre Optic Tree is for INDOOR USE ONLY.
2) Do not position or place near heaters or any other direct sources of heat.
3) Always position cables and extension leads so that they will not be a hazard to the elderly, pets and children.
4) DO NOT position this product where it may be covered by other items e.g. curtains, nets or bedding or tree skirts.
5) The mains transformer MUST be located INDOORS.
6) This product is suitable for positioning on surfaces which have normal flammability e.g. wood, plasterboard, and
masonry. However, this does not include highly flammable surfaces (e.g. polystyrene, textiles).
7) Place tree on a level surface. Do not place on long pile carpet, as this may affect stability and interfere with the ventilation
of the base. Do not cover the ventilation holes in the base.
8) This product is not designed for permanent or long-term use.
Assembly
fig.1
1) Prepare the base. fig.1 ready.
2) Insert tree into the hole of the base as fig.2.
3) Connect the output cable from the foot of the tree to the transformer, using the power cable provided as fig.3.
4) Shape tree by arranging branches to create a full and natural look.
5) Connect the transformer into mains supply & switch on at the wall socket.
6) The tree will light up; the colour will change and shimmer.
The LEDs on this tree are non-replaceable under normal conditions. If a bulb fails, the remaining bulbs should remain alight
providing the defective bulb is undamaged.
Warning
This tree is intended for INDOOR USE ONLY.

 IMPORTANT – DO NOT LOOK DIRECTLY INTO THE LED
This product contains NON- REPLACEABLE LED. Do not attempt to replace them.

Do not connect this product electrically to another product.

 Never allow any part of the set to meet a source of heat or flame.
Do not operate this product in its packaging.

 Keep the product well ventilated. DO NOT cover the product with cloth, a tree skirt, paper, or any other material.
Take care not to damage the cable or fittings.

fig.2
TYPE
DEWDROP STAR
QSF1001
fig.3