Festive YIDI 2 Instruction Use

TYPE YIDI 2
QSF1001
INSTRUCTION USAGE FOR P029913, P029914, P043895, P047138, P047141, P047142,
P047143, P048826, P048827, P048828,P048832, P048834, P048853, P048855,
P048856,P048859,P0448864 WOODEN ITEMS
BOX CONTENTS
1x wooden decoration
ASSEMBLY INSTRUCTIONS
No assembly needed, just insert the batteries to battery compartment, following the correct polarity.
OPERATING INSTRUCTION
Once the batteries have been inserted.
ON: Push the switch on the battery compartment to ON, the lights will come ON.
OFF: Push the switch to OFF on the battery compartment, the lights go OFF.
WARNINGS
Please read all instructions and warnings before use.
Keep away from children & pets.
Do not operate this item whilst still in the packaging.
The LED lamps are not replaceable.
Do not try to connect this set electrically to another set.
If there is any damage or breakage to the electric wire, please dispose of safely.
This light set is suitable for indoor use only.
Ensure that cables are fully unwound and sited where they will not become damaged or present a tripping
hazard.
Do not secure the wiring of this product with staples or nails.
Do not close doors or windows on the product, as this may damage the wiring insulation.
Do not submerge this product in water (e.g. puddles, guttering or ponds)
Remove batteries when not in use.
Batteries should only be installed by an adult.
Always remove exhausted or dead batteries form the product.
Do not dispose of in fire. Keep away from all sources of heat.
Remove batteries from the product before storage.
Do not short circuit the supply terminals.
Batteries are to be inserted with the correct polarity.
Never mix old and new batteries.
Batteries may explode or leak if misused.
Do not use battery eliminators with this item.
Do not charge non-rechargeable batteries.
If batteries are swallowed seek urgent medical advice.