Advertisement
Quick Links
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Product item number.
P051013
C
AREFULLY REMOVE THE CONTENTS FROM THE CARTON
Step 1: Locate the T
REE
inner and outer walls of the hub align, and the stand forms an "X" shape (see Fig.
1). There are three (3) screws with the stand. Insert the screws into the holes,
but do not turn all the way in. Leave space inside the hub for the tree pole to
slide down.
Place the stand where you are going to set up the tree. THIS PRODUCT IS
SUITABLE FOR INDOOR USE ONLY.
WHERE IT IS LIKELY TO WOBBLE DUE TO UNEVEN FLOORS OR
THICK CARPETING. PLACE THE TREE ON A LEVEL SURFACE.
Step 2: Find T
S
REE
ECTION
pole cap (see Fig. 2) that is covering the bottom of the pole. It is a protective cover only
and can be kept for storage if desired. Insert T
force the pole. It will slide down to its correct position. Make sure the pole is seated firmly
in the stand. Turn all three screws evenly until they touch the pole. If T
sitting straight, then simply loosen the screws, adjust the tree pole, and retighten the
screws. Allow the branches to fall into place.
Step 3: Go to the bottom section of the tree and find the power plug. Connect the plug to
a power outlet in your home. Your bottom section should now be lit.
Step 4: All trees will have a minimum of two (2) Tree Sections. Locate T
the letter "B". This tree has Instant Light® technology which means that you simply insert the
ytree section into the next section for a quick lighting setup. It is a collar to collar fit with a lock in
I
N S T R U C T I O N
Artificial Christmas Tree with
Instant Light® Technology.
ASSEMBLY
.
KEEP THE CARTON FOR FUTURE STORAGE
CONTENTS
S
. Rotate the legs until the three (3) holes on the
TAND
IMPORTANT: DO NOT PLACE THE TREE
A, tagged with the letter "A". Remove the green
M
A N U A L
• Dependent upon the tree style and size, there could be
1 – 5 Tree Sections. The Tree Sections are coded by an
alphabetical letter. The first section that goes into the
Tree Stand is "A" Section, then "B" Section next, then "C"
Section, and so on.
• 1 EA. Tree Stand (with 3 screws)
.
S
A into the T
REE
ECTION
TYPE
JJLIT180
QSF1003
PARTS LIST
. DO NOT
FORCIBLY REMOVE
Fig. 1
S
. Do not
REE
TAND
S
A is not
REE
ECTION
S
B, tagged with
REE
ECTION
Fig. 2
Advertisement
Related Manuals for Festive P051013
Summary of Contents for Festive P051013
- Page 1 Product item number. PARTS LIST • Dependent upon the tree style and size, there could be P051013 1 – 5 Tree Sections. The Tree Sections are coded by an alphabetical letter. The first section that goes into the Tree Stand is “A” Section, then “B” Section next, then “C”...
- Page 2 feature. Make sure S B is seated securely into the top of T A. If the section is ECTION ECTION seated properly, then it will light up. If you have three (3) Tree Sections, then the next Section will be Section “C”; and it will be placed on top of Section “B”.
- Page 3 STORAGE ROPER TREE HANDLING AND STORAGE WILL HELP YOU GET THE MOST OUT OF YOUR TREE FOR MANY YEARS TO COME Remove any ornaments and decorations that were added by you and did not come with the tree. Unplug the tree from the power source in your home. Starting with the top, separate each tree section and stand gently, being sure not to roughly handle as it could cause damage to the parts.
- Page 4 THIS SET OPERATES ON – 31v DC 5.6w TRANSFORMER RATING – 31v DC 6 w LED BULB RATING – 3.1v 0.0045a 0.014w Having difficulty with this Festive Productions Limited product? Then contact us on our support email. NP44 7EZ otters brook,...
Need help?
Do you have a question about the P051013 and is the answer not in the manual?
Questions and answers