Radio Operations - Aiwa NSX-AJ500 Operating Instructions Manual

RADIO OPERATIONS

En
Manual tuning
1 Press TUNER/BAND (SHIFT+BAND on the remote
control) repeatedly to select a band.
The unit switches to the radio from any other function and
alternates between FM and AM.
2 Press fDOWN or gUP to tune in to a
station.
"TUNE" is displayed when a station is tuned in.
"1" lights up for FM stereo reception.
To search for a station automatically (Auto Search)
Hold down fDOWN or gUP.
The unit searches for a station up or down the band and stops
at reception.
To stop the search manually, press fDOWN or gUP.
•Auto Search may not stop at stations with weak signals.
12
01NSX-AJ500/AJ503(U)/Eng 12
Preset tuning
Preset your favorite stations and tune them in directly.
Presetting stations
1 Press TUNER/BAND to select the band.
2 Press fDOWN or gUP to tune in to the
desired station.
3 Press aSET to store the station.
The preset number, beginning from "1", appears on the
display.
4 Repeat step 1 to 3 to preset other stations.
•You cannot store more than a total of 32 preset stations.
"FULL" is displayed.
12/22/00, 3:51 PM
Tuning in to preset stations
On the unit
1 Press TUNER/BAND to select the band.
2 Press cPRESET repeatedly or turn MULTI JOG.
With each press, the station with the succeeding preset
number is tuned in.
On the remote control
1 Press either SHIFT+BAND or FUNCTION to select
the band.
2 Press the numbered buttons for the preset
number of your desired station.
- To select preset number 20, press +10, +10 and 0.
- To select preset number 15, press +10 and 5.
To clear a preset station
1 Tune in to the station by preset tuning.
2 Press sCLEAR, then press aSET within 4 seconds.
Preset numbers of preset stations in the band with higher
numbers decrease by one.