Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Page 3
Control Panel........22 Table of Contents Symbols on the Display ....23 1 Safety Instructions......Programme and Consumption Intended Use........Table ..........Safety of Children, Vulnerable Programme Selection....26 Persons and Pets ......Programmes ........26 Electrical Safety......Temperature Selection ....29 Handling Safety ......
Page 4
1 Safety Instructions This section includes the safety • This appliance is intended to instructions necessary to pre- be used in household and sim- vent the risk of personal injury or ilar applications. For example; material damage. – Personnel kitchens of stores, Our company shall not be held offices and other work envir- responsible for damages that...
Page 5
with, climb on top or inside the • Do not tuck the power cord un- product. Check inside the der the product or to the rear product before use. of the product. Do not put • Use child lock to prevent chil- heavy items on the power dren from intervening with the cord.
Page 6
• Never connect your product to product for installation and electricity saving devices. Such make sure the electrical mains, systems are harmful to the clean water mains and water product. outlet are suitable. If not, call a qualified electrician and Handling Safety plumber to have them make the necessary arrangements.
Page 7
• Do not install the product at be minimum 0.1 MPa (1 bar) locations where the temperat- and maximum 1MPa (10 bars). ure drops below 0 ºC. 10 to 80 litres of water should • Do not place the product on a be running from the tap in a carpet or similar surface.
Page 8
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
Page 9
– Make sure the room where • Do not put hands, feet and the washing machine is metal objects under or behind placed is well ventilated. your product. This can cause jams, and any sharp edge can – Wipe the door gasket and cause personal injury.
Page 10
in the machine cools down in order to avoid risk of getting burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE).
Page 11
3 Technical Specifications Supplier’s name or commercial brand Grundig GWPE8105E4168WW Model name 7100081500 Nominal Capacity (kg) 10.5 Maximum spin speed (cycle/min) 1400 Built-In Height (cm) 84,5 Width (cm) Depth (cm) Single Water inlet / Double Water inlet + / -...
Page 13
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Page 14
Cover A 3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. NOTICE Remove the transportation safety bolts before operating the product. Tilt the machine back slightly. Rest the tabs Otherwise, the product will get of Cover A against the lower panel.
Page 15
vent the water leaks and resultant dam- of the hose into the waste water or do ages, keep the taps closed when you do not insert it into the drain for more than not use the product. 15 cm. If it is too long, cut it short. 5.
Page 16
that shall be incurred due to using the Damaged power cables should be product without grounding according to replaced by the authorised service local regulations. in order to prevent possible danger. • Connection must comply with national 4.8 Start Up regulations.
Page 17
• Tough stains must be treated properly provided for “Loading door cannot be before washing. opened” error in the Troubleshooting • Wash trousers and delicate laundry section. turned inside out. 5.5 Correct Load Capacity • Laundry that are subjected to materials such as flour, lime dust, milk powder, etc.
Page 18
(3) Softener compartment quid detergent or softener compartments • Add detergent and softener before start- are empty, the dosage symbol will flash in ing the washing programme. programs where detergent dosing is al- • Do not leave the detergent drawer open lowed.
Page 19
5.6.2 Dosage Selections, Cancellation or Use of Powder Detergent We recommend filling the detergent com- Liquid detergent cannot be selected in partment with liquid detergents that can be some of the programs. Powder detergent used in common for coloured and white must be used in these cases.
Page 20
5.6.3 Detergent and/or Softener Run- Liquid detergent and softener dosing symbols become active or inactive according to the program selected on ning Out the screen. When the detergent or the softener put in- First position on the display means liquid de- side the detergent drawer finishes, the tergent is active, softener is on.
Page 21
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
Page 22
6.1 Control Panel 1 Programme Selection Button 2 Spin Speed Adjustment Button 3 Temperature Setting Button 4 Display 5 ON/OFF Button 6 Start/Pause Button 7 End Time Setting Button 8 Auxiliary Function Button 5 9 Auxiliary Function Button 4 10 Auxiliary Function Button 3 11 Auxiliary Function Button 2 12 Auxiliary Function Button 1 13 Remote Control Button...
Page 23
6.2 Symbols on the Display 1 Temperature Indicator 2 Wireless Connection Indicator 3 Remote Control Indicator 4 Programme follow-up indicator 5 Dosing Unit Indicator 6 Duration information 7 Programme Start Indicator 8 Delayed Start Enabled Indicator 9 Door Lock Engaged Indicator 10 Auxiliary function (Dosing) Indicators 11 Child Lock Engaged Indicator 12 Auxiliary Function Indicators 4...
Page 25
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
Page 26
6.4 Programme Selection • Eco 40-60 In the Eco 40-60 programme, you may 1. Determine the programme suitable for wash normally soiled cotton laundry that the type, quantity and soiling level of the are specified to be washed together at laundry in accordance with "Programme 40°C or 60°C.
Page 27
• HygieneCare+ • Supreme Refresh Applying a steam step at the beginning of Use this programme to reduce the creases the programme allows to soften the dirt and ironing times of a small amount of un- easily. spotted cotton, synthetic or mixed laundry. Use this programme for your laundry (baby This is not a washing programme.
Page 28
of your machine. Prewash detergent may • Delicate pour out on your clothes and cause You can wash your delicate clothes such as stains. cotton/synthetic blended knitwear or ho- ** It is recommended to operate the cycle siery in this programme. It washes with with no more than 6 shirts to minimize more delicate washing action.
Page 29
Below you can find the soil groups that can Fragile toys with hard surfaces be selected with the “Quick/Intensive” set- must not be washed under any cir- ting button: cumstances. Toys must not be washed together When “Intense” is selected; with your garments since they may Sweat, collar dirt, food, mayonnaise, salad harm laundry.
Page 30
Whenever a new programme is selected, without spinning your laundry. Programme the recommended spin speed of the selec- will resume and complete after draining the ted programme is displayed on the Spin water. Speed indicator. It is possible that the re- If you want to spin the laundry held in wa- commended spin speed value is not the ter, adjust the Spin Speed and press Start/...
Page 31
You can reduce the time for your lightly When an auxiliary function button soiled laundry by pressing the Fast/Intens- that cannot be selected with the ive button in the programmes which come current programme is pressed, the with intense being selected. When you washing machine will make a warn- press the button once, the LED will turn off ing sound.
Page 32
If you change the detergent model • Auto Dosing Setting you use, we recommend that you You can use this function to change the adjust the dosage again to achieve dosing amounts of the Liquid Detergent the best results. and Softener. Press the Automatic Dosage Programme Recommendation by Laundry button to activate the function.
Page 33
tates for up to 8 hours for preventing the laundry from creasing at the end of the pro- gramme. You can cancel the programme and take your laundry out at any time dur- ing the 8-hour duration. Press the function selection key or the machine on/off key to 2.
Page 34
To activate wireless connection: With the End Time function, the start-up of the programme may be delayed up to 24 Press and hold Remote Control button for 3 hours. After pressing End Time Setting but- seconds. After countdown “3-2-1” on the ton, the programme's estimated ending display ends, “On”...
Page 35
4. Press Start / Pause. Time countdown If the Remote Control Function is starts. selected, the door will be locked. In order to open the door you must de- Additional laundry can be added activate Remote Control Function into the machine during the End by either pressing the Remote Con- Time countdown.
Page 36
Changing the programme selection after programme has started: Programme cannot be changed when a programme is running. You need to pause the operating programme if the Child Lock 6.12 Changing the Selections After is not active and select a new programme. Programme has Started This action will cancel the current pro- Adding laundry after the programme has...
Page 37
The , Bluetooth of your smart device should If you turn the programme selection be on and your device should be connected button when the Child Lock is en- to the internet during setup. Your smart abled, the programme will not be device should be close to the washing ma- cancelled.
Page 38
5. Wait until the installation is complete. All safety measures described in When setup is complete, give your the "GENERAL SAFETY INSTRUC- washing machine a name. Now, you can TIONS" titled section of the user see the product you have added to the manual are also valid for remote HomeWhiz Application.
Page 39
6.15.2 Setting up a Washing Machine After this operation, you cannot use the HomeWhiz function of your washing ma- Connected to Someone Else's chine until you do another setup. Account Your product does not need to be connec- If the washing machine you want to use ted to the internet in order to delete an ac- was previously introduced to the system count matching.
Page 40
In certain cases, it deactivates itself for safety reasons: • When your washing machine undergoes a power interruption. • When the door of the washing machine is opened,. When the Remote Control is enabled, you • When programme knob is turned and a can only turn on the machine, turn it off and different programme selected or appli- follow the status through your washing ma-...
Page 41
• If a different-concentration washing 2. Remove the drain stick located at the agent is added (to avoid wasting the pre- back of the drawer from its slot. viously filled detergent, you can put them 3. Place the slot behind the detergent in the powder detergent compartment in drawer to be emptied towards the inside the next washing and consume it by se-...
Page 42
Repeat Drum Cleaning process in every 2 months. NOTICE: Use an anti-limescale suit- able for the washing machines. 1. Close the taps. 2. Remove the nuts of the water intake hoses to access the filters on the water intake valves and clean them with an ap- propriate brush.
Page 43
3. Follow the below procedures in order to NOTE: drain water. Foreign substances left in the pump filter may damage your If the product has an emergency water product or may cause noise prob- draining hose, in order to drain the water: lem.
Page 44
Water inside the product. Product stopped shortly after the pro- gramme started. • Some water has remained in the product due to the quality control processes in • Machine has stopped temporarily due to the production. >>> This is not a failure; low voltage.
Page 45
• Number of rinses and/or amount of rins- • Excessive foam has occurred and auto- ing water have increased. >>> Product in- matic foam absorption system has been creases the amount of rinsing water activated due to too much detergent us- when good rinsing is needed and adds an age.
Page 46
• Excessive amount of detergent is used. • Draining hose is folded. >>> Check the >>> Put the detergent in the correct com- drain hose. partment. Do not mix the bleaching agent Laundry became stiff after washing. (**) and the detergent with each other. •...
Page 47
• Water pressure is low. >>> Check the wa- Foam is overflowing from the detergent ter pressure. drawer. • The detergent in the main wash compart- • Too much detergent is used. >>> Mix 1 ment got wet while taking in the prewash tablespoonful softener and ½...
Page 48
(who are not au- comply with the above thorized by Grundig ) shall void the guaran- The spare part availability of the washing tee. machine or washer-dryer that you pur- chased is 10 years.
Need help?
Do you have a question about the GWPE8105E4168WW and is the answer not in the manual?
Questions and answers