Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..27 Table of Contents 6.8.1 Auxiliary Functions..... 27 1 Safety Instructions......6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........29 Electrical Safety......
1 Safety Instructions This section includes the safety – Ranches, instructions necessary to pre- – By customers of hotels, mo- vent the risk of personal injury or tels and other accommoda- material damage. tion facilities, Our company shall not be held –...
• Do not forget to close the load- cord. Do not over bend, crush ing door when leaving the and touch the power cable to room where the product is loc- sources of heat. ated. Children and pets may • Only use the original cable. Do get locked inside and drown.
qualified electrician and Handling Safety plumber to have them make • Unplug the product before the necessary arrangements. moving, remove the water out- These operations are the re- let and water main connec- sponsibility of the customer. tions. Drain any water left in- •...
Page 7
• Do not place the product on a be running from the tap in a carpet or similar surface. It minute in order for the product would create fire hazard since to function properly. If the wa- it cannot receive air from un- ter pressure is above 1 MPa derneath.
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
– Make sure the room where • Do not put hands, feet and the washing machine is metal objects under or behind placed is well ventilated. your product. This can cause jams, and any sharp edge can – Wipe the door gasket and cause personal injury.
in the machine cools down in order to avoid risk of getting burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE).
4 Installation • Total weight of the washing machine and Please read the “Safety Instruc- the dryer -with full load- when they are tions” section first! placed on top of each other reaches to approx. 180 kilograms. Place the product Your washing machine automatic- on a solid and flat floor that has suffi- ally detects the amount of laundry...
• Cover B and the Cap are optional. If avail- NOTICE able, attach cover B and the Cap. Keep the transportation safety bolts in a safe place to reuse when Cover B the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disas- sembly procedure.
4.5 Connecting the Drain Hose to leaks, always secure the connection between the extension hose and the the Drain draining hose of the product with a suit- 1. Attach the end of the drain hose directly able clamp so that it does not come off to waste water drain, washbasin or and cause leaks.
• If the current supply to the fuse or stallation”. To prepare the product for breaker in the house is less than 16 washing laundry, perform first operation in Amps, have a qualified electrician install Drum Cleaning programme. If this pro- a 16 amp supply.
5.3 Tips for Energy and Water Sav- Follow the instructions in “Pro- gramme and consumption table”. When the appliances is overloaded Following information will help you use the product’s washing performance will product in an ecological and energy/water- drop. Moreover, noise and vibration efficient manner.
Page 17
• If you are using a programme without Adjusting the Detergent Amount pre-washing, do not put detergent in the The amount of detergent depends on the pre-wash compartment (compartment amount of laundry, how soiled they are and no. “1”). the water hardness. •...
Use of Gel and Tablet Detergents Using Bleach and Decolourants • If the detergent is fluid and there is no li- • Select a programme with pre-washing quid detergent compartment in your and add bleach at the start of pre-wash- product, place the gel detergent in the ing.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration Information 4 Door Lock Is Engaged Symbol 5 Programme Follow-up Indicator 6 No Water Indicator 7 Delayed Start Enabled Indicator 8 Auxiliary Function Indicators 3 9 Auxiliary Function Indicators 2 10 Child Lock Enabled Symbol 11 Auxiliary Function Indicators 1 12 No Spin Indicator...
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection sured with intense washing movements. If the quick wash function is not selected, ef- 1. Determine the programme suitable for fective washing and rinsing performance is the type, quantity and soiling level of the ensured for your heavily soiled laundry. laundry in accordance with "Programme •...
special drum movement even if the temper- This is not a washing programme. ature is low. It is recommended to use li- Do not add chemicals such as de- quid detergent or woollen shampoo for tergent, bleach, stain remover, etc. dark coloured laundry.
dry in this programme. Before washing, gar- Whenever a new programme is selected, ment tags should be checked (recommen- the recommended temperature for the pro- ded for cotton shirts, trousers, shorts, t- gramme appears on the temperature indic- shirts, baby clothes, pyjamas, aprons, table ator.
If you are not going to unload your laundry Select the desired auxiliary functions be- immediately after the programme com- fore starting the programme. Whenever a pletes, you can use Rinse Hold function in programme is selected, icons of the auxili- order to prevent them from getting wrinkled ary function symbol that is selected to- when there is no water in the machine.
press the button once, the LED will turn off washing by reducing the amount of water and you will reach the appropriate pro- used, without compromising on washing gramme duration for your normally soiled performance. clothes/laundry. When you press the same •...
With the End Time function, the end time of You can switch on and off the ma- the programme may be set up to 24 hours. chine with On / Off button when the After pressing End Time button, the pro- Child Lock is active.
Additional laundry can be added To avoid any water overflow before into the machine during the End opening the loading door, make Time countdown. At the end of the sure there is no water left inside the countdown, End Time indicator machine.
You can also change the speed and tem- perature settings. See ‘’Spin speed selec- tion" and "Temperature selection". The loading door will not open if the water temperature in the machine If the water level in the machine is not suit- is high or the water level is above able when you press Start/Pause button, the loading door baseline.
7.1 Cleaning the Detergent Drawer After every washing make sure that no for- eign substance is left in the product. Clean the detergent drawer at regular inter- If the holes on the door gasket shown in the vals (once every 4 to 5 wash) as mentioned figure is blocked, open the holes using a below to prevent accumulation of powder toothpick.
propriate brush. If the filters are too Temperature of the water inside the dirty, remove them from their places product may rise up to 90 ºC. To with a pliers and clean in this way. avoid the risk of scalding, clean the filter after the water inside the 3.
8 Troubleshooting • A hard substance has entered into the Please read the “Safety Instruc- pump filter. >>> Clean the pump filter. tions” section first! • Transportation safety bolts are not re- moved. >>> Remove the transportation Programmes do not start after the loading safety bolts.
Page 35
• Loading door may be stuck because of • Timer may stop during spinning step. >>> the pressure it is subjected to. >>> Grab Automatic unbalanced load detection the handle and push and pull the loading system is activated due to the unbal- door to release and open it.
Page 36
• Excessive amount of detergent is used. • A higher temperature was selected. >>> >>> Use the recommended amount of de- Select the proper programme and tem- tergent appropriate for water hardness perature according to the type and soiling and the laundry. degree of the laundry.
Page 37
softener step. Wash and clean the drawer • Some meshed laundry such as tulle may with hot water. Put the detergent in the foam too much because of their texture. correct compartment. >>> Use smaller amounts of detergent for • Detergent was mixed with the softener. this type of item.
(who are not au- comply with the above thorized by Grundig ) shall void the guaran- The spare part availability of the washing tee. machine or washer-dryer that you pur- chased is 10 years.
Page 39
When the appliance is turned off, pressing 1 and 2 auxiliary function buttons are pressed for a long time, a 3-2-1 countdown, and the total washing cycles completed on the appliance is displayed. After the total washing cycle is displayed, the failure codes, if any, are displayed. Check the information on the screen through the table below.
Need help?
Do you have a question about the GWP48415W and is the answer not in the manual?
Questions and answers