Migrate Button; Create A Sata Volume Button - ZyXEL Communications NSA 210 User Manual

4.6.2 Migrate Button

Do the following steps to create a RAID 1 volume.
Once you attach the eSATA hard disk to the NSA, the Storage > Volume screen
1
shows the Migrate button.
Click the
Migrate
2
10 minutes for the RAID 1 volume to be created.

4.6.3 Create a SATA Volume Button

If you do not have an existing volume in the Storage > Volume screen, do the
following steps to create a RAID 1 volume.
In the Storage > Volume screen, click Create a SATA Volume.
1
In the Disk Configuration screen, you can select the storage method.
2
• Type in the Volume Name for your RAID 1 volume. The volume name can be 1
to 31 characters (a-z, 0-9, " " [spaces], "_", and ".").
• Choose RAID 1 and click Apply.
NSA210 User's Guide
button and you can see the following progress bar. Wait for up to
Chapter 4 Tutorials
87